Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Diamond Black Geezer]

Just as per title, really. I'll probably be popping into my local scrappy Saturday - I had a look in the Wanted section and can't see anything that is in demand at present, but if you have any specific requests, please let me know :-)

If memory serves, they're a star silver and a metallic maroon saloons, both non-V6, probably both 2.2s one petrol, one diesel. Average-y spec, most likely CD or thereabouts.

Apologies to mods if flaunting forum rules regarding sale of items, as nothing's strictly 'for sale' at this point, hope that's ok. Ta in advance, all.

Whenever I can help, I will. 

[VXL V6]

Good condition selector surround.... or just any that isn't completely covered in scratches and had a hole drilled through it so I can refurbish it.... 

[Steve B]

Just as per title, really. I'll probably be popping into my local scrappy Saturday - I had a look in the Wanted section and can't see anything that is in demand at present, but if you have any specific requests, please let me know :-)

If memory serves, they're a star silver and a metallic maroon saloons, both non-V6, probably both 2.2s one petrol, one diesel. Average-y spec, most likely CD or thereabouts.

Apologies to mods if flaunting forum rules regarding sale of items, as nothing's strictly 'for sale' at this point, hope that's ok. Ta in advance, all.

Whenever I can help, I will. 

Looking for a Mint rear bumper 

[minifreek]

Both rear non vented calipers with new seals installed LOL

[Diamond Black Geezer]

VXL V6 - Fear not you are already on - and at the top of- the shopping list   

BIGtime - Will check. Didn't realise you were after one - hope it's still in decent nick. I do remember now that maroon one had parking sensor fitted - if that is either a bonus or a disadvantage just let me know  Will get the paint code for you

minifreek - Almost definite that there will be no vented rear calipers, however I will of course check for any 3.2 V6s that may be hiding away there

[Steve B]

I am Reubens Red Z594 But MV6 so dont have them Help you go backwards Things.. Got a towbar instead 

[Magwheels]

What a "Diamond Geezer"!

[05omegav6]

Rear diff mounts please... the more shagged the better... must be complete, but not necessarily intact

[EMD]

A full leather interior for Frontera lwb please 

[Diamond Black Geezer]

What a "Diamond Geezer"!

One tries 

[EMD]

Mite as well open your own breakers yard 

[Diamond Black Geezer]

If you saw my back yard you'd think I already have! 

Sadly it's all rubbish, broken or useless 

[EMD]

Well if your like me you never throw anything away , it will come in handy at some point me says  and most of the time it does when i can find it  My tin tent is temporarily a parts cabin 

[biggriffin]

 please sir mv6 front and rear bumpers,and reinforcements, in the rare z157 silver,delivered for £50. 

[EMD]

2 bumpers in my back garden chucked on the wood pile 

[tigers_gonads]

Front Mv6 Prodrive towing eye cover PLEEEEEESE 

Don't worry if its off Biggriffins bumper, i'm sure he won't mind 

[steve6367]

If there are any scuttle clips that would be great, I keep losing them when I have it off! 

[minifreek]

Don't bother with the calipers, I ordered a matching pair complete with vented discs and pads last night

Thanks anyway


Just remebered, I could do with full scuttle plastics trim pieces.....

[omega2018]

can you whip out a brake bleed nipple, measure the overall length and post it on oof?  then I can pre order shiny new ones  - will save me bleeding twice.  i assume the front and rear are at least the same length.

[A380 Elite]

FLOOR MAT CARPET SCREW, to hold down carpet mat.
 

[biggriffin]

can you whip out a brake bleed nipple, measure the overall length and post it on oof?  then I can pre order shiny new ones  - will save me bleeding twice.  i assume the front and rear are at least the same length.

Go to Halfords,got them on da shelf.

[woolley11]

Hi

Did you see if the drivers door was good or not on the star silver one 

I need one as my pre fl is a bit ropy

[Diamond Black Geezer]

Sorry but the scrappy has this unique special way of using the forklift to lift the cars - thus warping and basically making totally unsaleable any doors - if I'm lucky and it's managed to only be in a few days, then I might be able to get a door, but that's all I can do, I'm afraid, just keep checking. At least if its Star Silver you#'re after there's more than a couple of Omegas out there in that colour, so fingers crossed for you 

Not managed to get any bits as yet,chaps, got three posters to design in my spare time this weekend, plus actually finish the O/S suspension, then turn her round, and disassemble, and rebuild/repaint the N/S Suspension, also fit in a Birthday meal for the sister, so time is a bit non-existent this weekend, sadly, but next week, possibly one dinnertime, hopefully. 

[Diamond Black Geezer]

can you whip out a brake bleed nipple, measure the overall length and post it on oof?  then I can pre order shiny new ones  - will save me bleeding twice.  i assume the front and rear are at least the same length.

Go to Halfords,got them on da shelf.

Also apologies, I'll try and remember to measure mine for you - they're off the car in a vending machine plastic cup at the mo, so a fair bit easier than having to take one out of the car, just to measure

[omega2018]

can you whip out a brake bleed nipple, measure the overall length and post it on oof?  then I can pre order shiny new ones  - will save me bleeding twice.  i assume the front and rear are at least the same length.

Go to Halfords,got them on da shelf.

Also apologies, I'll try and remember to measure mine for you - they're off the car in a vending machine plastic cup at the mo, so a fair bit easier than having to take one out of the car, just to measure

thanks although halfords probably only sell one there are several different lengths - (head size in brackets):

M8 1.25  24.5mm (8mm), 32.5mm (9mm) , 34.7mm (8mm), 35.5mm (9mm), 41.5mm (9mm), 49mm (9mm),

M8 1.0  28mm (8mm), 32mm (8mm), 33.5mm (9mm), 38mm (8mm)

the chances of the halfords ones being the same length as mig originals are pretty close to nil i expect

[05omegav6]

Length is almost irrelevant 

Obviously shorter than the originals won't work. Ever. But longer is fine, but be sure to coat the exposed thread with summat suitable

[omega2018]

Length is almost irrelevant  Obviously shorter than the originals won't work.

thats not really almost irrelevant then

[05omegav6]

Length is almost irrelevant  Obviously shorter than the originals won't work.

thats not really almost irrelevant then