Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Doctor Gollum]

ISO7480 Fuel hose of suitable diameter plus stainless pipe clamps should see it done

[MikeDundee]

Would assume these;

https://www.ebay.co.uk/itm/Mikalor-W1-Spring-Hose-Clips-Fuel-Air-Water-Gas-Silicone-Hose-Clamps/322510432619?hash=item4b171ea96b:m:mqRRSm0yBoe_4SeruDe4qVw:rk:1:pf:1&frcectupt=true

https://www.ebay.co.uk/itm/NAUTILUS-MARINE-FUEL-HOSE-ISO7480-A1-/302868733427

Means the hose will need to be joined, so will need some form of connector to fit inside connecting hose

[Doctor Gollum]

Or sleeve it Shop around though, as that looks expensive 

[Nick W]

Would assume these;

https://www.ebay.co.uk/itm/Mikalor-W1-Spring-Hose-Clips-Fuel-Air-Water-Gas-Silicone-Hose-Clamps/322510432619?hash=item4b171ea96b:m:mqRRSm0yBoe_4SeruDe4qVw:rk:1:pf:1&frcectupt=true

https://www.ebay.co.uk/itm/NAUTILUS-MARINE-FUEL-HOSE-ISO7480-A1-/302868733427

Means the hose will need to be joined, so will need some form of connector to fit inside connecting hose

I distrust those clamps on a low pressure/low temp cooling system. I would never use them on a pressurised fuel system. Never! Those a clamp that is tightened by a screw thread. I've never had issues with branded Jubilee clamps in these applications, but do understand why you might want to use the specific sized, fuel hose clamps.


That hose is extremely expensive. Go to a proper motor factors or hydraulic supplier who will cut however much you want off the reel for under £1 a metre.