1
Omega Electrical and Audio Help / Re: low beam fld vision
« on: 05 August 2019, 19:55:24 »Just changed the n/s servo and still the same, so checked sensors again and rear sensor ball joints are seized solid. Tried freeing them off with WD40 but no joy. Will take rear wheel off tomorrow and try again.I still haven't changed the servo yet as it rained all weekend, but I will also check again the sensors. I'll disconnect the ball joints and see if the arms move freely. I would of thought if the sensors was seized the arm would snap off the ball joints as the suspension moved up and down?DON'T POP THE ARMS OFF.
They can be checked for free movement by simply twisting the connecting rod slightly side to side if they are a bit stiff, then some 3 in 1 oil can be worked in to the ball joints.
Once you start popping them off, they'll keep popping off