Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Chopsdad]

Its a lot easier to fix.

Lube the worm, drive easy from behind the seat) and look for the point where it attaches to the rear seat bar. Around this is a plastic cover, remove it and you can then insert a 13mm socket (its tight) on an extension.

This will locate on the end of the worm drive and allow you to turn it and free it off.

Easy!

I thought we had to keep the posts clean.

[theolodian]

Its a lot easier to fix.

Lube the worm, drive easy from behind the seat) and look for the point where it attaches to the rear seat bar. Around this is a plastic cover, remove it and you can then insert a 13mm socket (its tight) on an extension.

This will locate on the end of the worm drive and allow you to turn it and free it off.

Easy!

I thought we had to keep the posts clean.

PMSL

[Doughboy]

Its a lot easier to fix.

Lube the worm drive (easy from behind the seat) and look for the point where it attaches to the rear seat bar. Around this is a plastic cover, remove it and you can then insert a 13mm socket (its tight) on an extension.

This will locate on the end of the worm drive and allow you to turn it and free it off.

Easy!

Thanks I will give it a try before ripping the seats out, sounds pervy though

[Marks DTM Calib]

If I get half an hour today, I will create a maintenance guide.

[Marks DTM Calib]

Maintenance guide added here:

Freeing Off The Seat Height Adjuster

[Doughboy]

Easiest fix i've done so far, 2 mins to free off both seats. Thanks