Topic: My omega update pictures (Read 13773 times)

X3 OXE · « **on:** 23 January 2012, 14:28:54 »

Thought id post a few up to date pictures

2001 ex police omega MV6 manual

Last couple of pictures show when it had the 19's on it

Spec:

ENGINE & TRANSMISSION:
Reconditioned 3.1 V6 Engine (86mm bore)
Dual Ram Removed, Resonator Box Fitted With Samco Hoses
Second Cold Air Feed Cut Into Standard Airbox
EGR / Secondary Air Injection Removed
3.2 Stainless Steel Exhaust Manifolds
Custom Stainless Steel Exhaust System Cat-Back
TB Heater Pipes Removed (2.5TD Header Tank Fitted)
3.8Bar Fuel Pressure Regulator
Port & Polished Middle Inlet Manifold and Plenum
A/C Pump, Pipes & Rad Removed (Cavalier V6 Aux Belt)
Limited Slip Diff
244.5bhp and 222.7ft-lbs @ flywheel
212.6bhp and 202.8ft-lbs @ wheels

BRAKES:
Drill & Grooved Discs All Round

INTERIOR:
Basic police spec interior removed and full elite interior fitted
Full Elite Black Heated Electric Memory Leather Seats
Leather Doorcards
4x Electric Windows
Electric Rear Blind
Elite Wood Trim

EXTERIOR:
Genuine Irmscher Grill
MV6 Prodrive Front Bumper
MV6 Irmscher Boot Lip Spoiler
German Style Pressed Number Plates
Tinted Windows

WHEELS & SUSPENSION:
18" BBS RS Reps, Staggered 8J Fronts with 2.5" Dish & 9.5J Rears with 3" Dish
Correction Bolts for 5x112 VW Fitment
Front Tyres - 225/40/18
Rear Tyres - 255/35/18
Technix Coilovers
Negative camber front & rear

VXL V6 · « **Reply #1 on:** 23 January 2012, 17:59:02 »

That looks excellent! Don't fancy trying to keep it clean though!

ozzycat · « **Reply #2 on:** 23 January 2012, 18:28:30 »

now that is smart

omega3000 · « **Reply #3 on:** 23 January 2012, 18:42:01 »

Really nice , like the BBS alloys

x25dt · « **Reply #4 on:** 23 January 2012, 18:53:43 »

Stuning, love that set of alloys

Omega_Dan · « **Reply #5 on:** 23 January 2012, 19:30:07 »

Would love for mine to look like that. very very smart

dazzerM · « **Reply #6 on:** 23 January 2012, 19:39:53 »

Looks brilliant mate, you can tell it has had a lot of time and effort put into it.

And there is no other like it

jordan681 · « **Reply #7 on:** 23 January 2012, 20:45:10 »

Looks amazing.... love it...

Please post some pics of that tuned engine...

X3 OXE · « **Reply #8 on:** 23 January 2012, 21:10:02 »

Cheers guys.

Only have one more of the bay. still needs a few things doing to tidy it up, like new header tank etc. I also have a strutbrace to put on from germany, just need to cut and re-weld it slightly differently to clear the brake servo tank. Will get round to it soon..

These pics are from last year, only thing ive done is moved the EGR valve under the battery tray to hide it, in the pic its bolted on a bracket looking messy

jonny2112 · « **Reply #9 on:** 23 January 2012, 21:12:47 »

Very nice pal

gstylebaby · « **Reply #10 on:** 23 January 2012, 21:48:32 »

That looks so good mate very euro.

cem_devecioglu · « **Reply #11 on:** 23 January 2012, 23:31:28 »

all very nice

Mr.Mint · « **Reply #12 on:** 24 January 2012, 09:01:51 »

Stunning!!!

Love the wheels and the height is perfect too...

omega3000 · « **Reply #13 on:** 24 January 2012, 20:53:11 »

Bagpipe box looks easier to get on/off ...not like the original

ted_one · « **Reply #14 on:** 24 January 2012, 20:58:04 »

Yep,had that car sitting on my driveway for about 20mins and then Jay took it away

jordan681 · « **Reply #15 on:** 24 January 2012, 21:43:05 »

One word... MMMMMMMMMMMM

Now toffee me for being dumb.. But EGR and secondary air removed.. Err please explain. Sounds like a mod I can do on mine

X3 OXE · « **Reply #16 on:** 24 January 2012, 22:37:39 »

You can buy a blanking plate for the EGR valve so it stays in the same place but is blanked. Which is how i use to have mine, but now ive made my own blanking plate on the plenum and moved the EGR under the battery out the way, it needs to remain plugged in so the ECU thinks its still working.

I used to have the secondary air injection removed and the manifold pipes blanked, but when i fitted the 3.2 exhaust manifolds it allowed me to remove the SAI altogether

Just tried to keep my intake temps as low as possible as the omega runs far to hot, the throttle bodie heater pipe removal is another good one. it warms the throttle bodie, which obviously raises the intake temps. so i blanked the waterbridge outlet and fitted a 2.5TD header tank without the throttle bodie heater pipe attachment

Removing the aircon is the best one by far though. the aircon rad and fans just block the coolent rad, when its all removed it gets airflow straight to the coolent rad. my temp gauge sits nice and low

And my second air feed is a 3" pipe cut into the bottom of the airbox, and ducting running to the front grill next to the original intake. So it gets all the air it needs and as cold as possible going into the engine.

I just want to redo the exhaust side of it next as im still running both CATS. and although the 3.2 manifolds are alot more free flowing, they are still very restrictive. So next im going to order the custom friedrich tubular manifolds and then go full custom exhaust from there back so it gets rid of the CATS as well

Should breathe perfectly then

Hope this helps a bit, Any questions just ask

Quote from: nitro on 24 January 2012, 20:58:04

Yep,had that car sitting on my driveway for about 20mins and then Jay took it away

Will have to bring it round again so you can see the new look in the flesh. pictures never do it justice. Or got a little meet Sunday if your up for it mate

StuntS · « **Reply #17 on:** 24 January 2012, 22:47:37 »

That looks loverly! Gorgeous in white!

Shane mvsex · « **Reply #18 on:** 25 January 2012, 10:51:58 »

i want to go round some roundabouts in this beast

Reefpotato · « **Reply #19 on:** 25 January 2012, 16:55:27 »

Nice work M8, takes allot of time,effort and money to get one looking that nice

Well done, inspirational to us all to say the least

Andys VXR · « **Reply #20 on:** 25 January 2012, 23:27:08 »

Really love the car thats the look im going for great work mate .

X3 OXE · « **Reply #21 on:** 26 January 2012, 00:41:17 »

Thanks for the comments everyone

omega3000 · « **Reply #22 on:** 26 January 2012, 07:04:00 »

Quote

TB Heater Pipes Removed (2.5TD Header Tank Fitted)

Another job for me to do

2 jobs done not many more to catch up on

Quote from: Reefpotato on 25 January 2012, 16:55:27

Nice work M8, takes allot of time,effort and money to get one looking that nice Well done, inspirational to us all to say the least

Just what i thought

ferrymega · « **Reply #23 on:** 27 February 2012, 00:30:46 »

I'll tell it briefly : You're the most beautiful OMEGA I know !

flyer 0712 · « **Reply #24 on:** 27 February 2012, 00:51:47 »

that is some nice piece of kit matey

kennny · « **Reply #25 on:** 28 February 2012, 14:53:44 »

I adore the wheels. Very nice car

X3 OXE · « **Reply #26 on:** 29 February 2012, 00:09:19 »

Cheers guys,

1 more new picture,. just modified a strutbrace from Germany for left hand drive models as cant get strutbraces for uk omega's, bit of cut and welding on the drivers side bracket to make it clear the brake servo bottle an jobs a goodun! Just got to re paint the bracket red as had to rub it down for welding

Can also see the second air feed pipe from the grill for those that wanted a pic...

kennny · « **Reply #27 on:** 29 February 2012, 09:25:45 »

Can i just ask what blanking off the egr valve does?

X3 OXE · « **Reply #28 on:** 29 February 2012, 13:56:15 »

Puts the exhaust gases into the inlet basically, so hotter intake temps and coats everything up over time. So blanking it will lower the intake temps and keep plenum an everything clean

kennny · « **Reply #29 on:** 01 March 2012, 16:36:21 »

Sounds like something to look into doing on mine.

HockeyDave55 · « **Reply #30 on:** 01 March 2012, 22:08:15 »

I've said it before and I'll say it again....
B-E-A-UTIFUL car... Exactly how I want mine to look, super smooth and super clean!

MV6 MAN · « **Reply #31 on:** 04 March 2012, 17:28:49 »

really nice car mate

ferrymega · « **Reply #32 on:** 04 March 2012, 21:40:11 »

Quote from: MV6 MAN on 04 March 2012, 17:28:49

really nice car mate

thanks, as you continue with the project

ferrymega · « **Reply #33 on:** 04 March 2012, 21:41:18 »

Quote from: ferrymega on 04 March 2012, 21:40:11

Quote from: MV6 MAN on 04 March 2012, 17:28:49
really nice car mate
[/quote

X3 OXE · « **Reply #34 on:** 06 March 2012, 00:29:59 »

Thanks again. Currently in bits fitting new alternator, thermostat, vectra alloy cam covers with new gaskets and spark plugs

And hopefully sourced some uprated engine mounts now as I keep breaking my passenger side, standard ones just seem to weak

Then she's ready for PVS!

serek · « **Reply #35 on:** 06 March 2012, 22:08:08 »

nice car you got there hope see you at PVs this year
where from you got this 245bhp and how many NM you got ATM??
thanks

Del Boy · « **Reply #36 on:** 06 March 2012, 22:14:26 »

Lovely car!!!

X3 OXE · « **Reply #37 on:** 07 March 2012, 07:27:50 »

Cheers, Yeah I'm at pvs again this year, I saw you last year having fun on the concrete

Got 244.5bhp and 222.7ft-lbs which is about 302NM

tgm147 · « **Reply #38 on:** 07 March 2012, 17:50:39 »

Quote from: X3 OXE on 07 March 2012, 07:27:50

Cheers, Yeah I'm at pvs again this year, I saw you last year having fun on the concrete

Got 244.5bhp and 222.7ft-lbs which is about 302NM

That's a brilliant result! Nice one.

Do you mind if I ask where you got your discs and pads from? Mine are going to need doing soon, pads especially. Probably going to go for EBC Yellow Stuff but am not sure about discs, can't find any drilled ones straight for the Omega.

X3 OXE · « **Reply #39 on:** 07 March 2012, 22:28:23 »

Cheers, got mine from eBay mate, only cheap ones but do the job.

Here's the link to the mtec ones I got: 120314449824 open eBay and search that number in the search box, £129 for the 4

MV6Danny · « **Reply #40 on:** 08 March 2012, 01:20:03 »

Nice, Very Nice. Very clean looking motor.

Love the wheels too.

MV6Matt · « **Reply #41 on:** 08 March 2012, 05:15:55 »

Quote from: tgm147 on 07 March 2012, 17:50:39

Quote from: X3 OXE on 07 March 2012, 07:27:50
Cheers, Yeah I'm at pvs again this year, I saw you last year having fun on the concrete

Got 244.5bhp and 222.7ft-lbs which is about 302NM

That's a brilliant result! Nice one.

Do you mind if I ask where you got your discs and pads from? Mine are going to need doing soon, pads especially. Probably going to go for EBC Yellow Stuff but am not sure about discs, can't find any drilled ones straight for the Omega.

Tar OX sport Japan are drilled and grooved and made for all variants of the Omega viz:-
http://en.tarox.com/products/brake-disc-sport-japan.html and
http://docs.tarox.com/brake-discs-catalogue/vauxhall.pdf

HTH

Matthew

bigtow · « **Reply #42 on:** 13 April 2013, 20:35:20 »

that is one sweet looking car curious about the correction bolts to let you fit vw stud pattern wheels ?

dazzerM · « **Reply #43 on:** 13 April 2013, 21:25:01 »

The correction bolts were 5x112 VW Fitment if I remember correctly

terry paget · « **Reply #44 on:** 13 April 2013, 21:45:07 »

Why did you remove the dual ram?

cam2502 · « **Reply #45 on:** 13 April 2013, 21:58:56 »

Stunning

P6UL K · « **Reply #46 on:** 13 April 2013, 22:01:34 »

It's been nearly a year since this thread was looked at, I'm sure I recall him saying he was going to sell it...?

dazzerM · « **Reply #47 on:** 13 April 2013, 22:07:42 »

It wasn't sold, it was broke in the end last June

There was a link to the thread in another post that has been commented on

dbdb · « **Reply #48 on:** 14 April 2013, 00:49:37 »

what happened?

P6UL K · « **Reply #49 on:** 14 April 2013, 01:01:36 »

I can't believe I missed that?! I'd of bought the most parts off of him too!

P6UL K · « **Reply #50 on:** 14 April 2013, 01:04:55 »

Just had a quick search and it doesn't look like he broke it via this site $:-\$

dazzerM · « **Reply #51 on:** 14 April 2013, 08:32:12 »

I had most of the good bits, LSD, Res box, 3.8fpr, Bose parcel shelf, interior.. I think that was it

Wheels, brakes,exhaust,coil overs, vibra technics race mounts flea bay

Plenum, and a few over goodies he still had until about a fortnight ago

P6UL K · « **Reply #52 on:** 14 April 2013, 08:49:30 »

Well that's cheered me right up! Lol

the alarming man · « **Reply #53 on:** 14 April 2013, 11:47:21 »

you are both right as jay did try to sell it but he wanted way too much for it (but it was a nice car) and he did go on to break it

JesperKjeldsen · « **Reply #54 on:** 16 April 2013, 21:33:14 »

omg the stering wheel is in the wrong side

looks wery nice.

HockeyDave55 · « **Reply #55 on:** 04 May 2013, 21:59:56 »

This is/was the nicest (IMHO) car on here!
I hope I can get mine somewhere close!!!
What a shame she was broken!

News:

Author Topic: My omega update pictures (Read 13773 times)

omega3000

Omega_Dan

cem_devecioglu

omega3000

ted_one

omega3000