Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[minifreek]

For some unknown reason my other thread has been locked.....?

So FULL Facelift Irmscher Bodykit sold as it is, it has got holes in the rear bumper where a towbar was fitted and rear sensors was fitted... A good bodyshop should be able to sort these out no problem... I dont want to hear its too much work.... it really isn't.... there are no cracks or splits on any part of the bodykit, front or rear including sideskirts.... all in very useable condition, just needs painting in the colour of choice... £250 OVNO

2.5 V6 heads, in very good condition from Vectra Challenge car engine number 020, blueprinted and built to tolerance by Swindon Race Engines.... £50 ONO

Set of cams : A cams £30 G cams £30

Longnose Plenum including bellows £25

3 litre bottom pulley - almost the same weight as a Courtney tuning alloy pulley - give or take a couple of ounces £10

Stainless exhaust system - CAT back (no cats) will need to be welded to your CATS to make it work or will supply downpipes without CATS that will need joining with a piece of exhaust tubing to de-cat it (this system alone cost £500 in November last year) £100 ONO

Set of Elite alloys - need light refurb to make good - all have very good (5+mm) Bridgestone Potenza tyres fitted with excellent tread £250 ONO

Set of 19" Snowflake alloys - again all with good tread, wheels need refurb but are all straight and not buckled - however 1 has been welded £250 ONO

ALL ITEMS MUST BE COLLECTED FROM WIGAN

Thanks

[zirk]

Saloon or Estate?

[minifreek]

1999 Persia Red v6 Elite saloon ☺

[minifreek]

Also have alloy Vectra cam covers with genuine Vx gaskets, so they wont leak....!!! (plastic ones thrown in for free)

More to be added as I find stuff....

[EMD]

Pm sent 

[minifreek]

PMs replied to...

[minifreek]

Also, V6 locking tool made by BluePoint (Snap-On) in very good condition including the big spanner for locking the tensioner in place £50 plus postage or collected

[minifreek]

Full set of Apex lowering springs in very good (but dirty) condition...

Much improved handling over the wallowy/boat like suspension you get with heavy cars...

They will lower the car 60/40 I believe, had them on mine and the ride is still cumfy and not too hard... Did have them fitted with Bilstein B4's which helped.... £60 ONO

[minifreek]

Deposit taken on bodykit

[razzo]

Near side xenon headlight, are mfl & fl the same?

[Diamond Black Geezer]

Nope, sorry. there's a slight point at the corner of the FL ones. PFL and MFL interchangeable.

[Doctor Gollum]

Nope, sorry. there's a slight point at the corner of the FL ones. PFL and MFL interchangeable.

They will physically fit, just look a bit odd...

[razzo]

Nope, sorry. there's a slight point at the corner of the FL ones. PFL and MFL interchangeable.

They will physically fit, just look a bit odd...

Would it pass an mot test if fitted?

[Diamond Black Geezer]

Oh, god, yeah. Absolutely no reason why not. Just google Omegas as you'll see the difference. You'll probably have to remove the lower bit of trim under the PFL/MFL headlamp, or chop at it to make it fit. Might look ok, to be honest I don't know of anyone who's done it, they've always been available enough, though.

What's wrong with yours, out of interest? I've got a spares Omega, but ideally want to flog is as a complete SORN no-MoT car, not one with entire doors/critical parts missing. However, turning up and swapping your knackered bits for any good bits on my spares car, plus a few sheckles, is more than doable   

[minifreek]

Oi.... WTF.....?

Talk about off topic.....