Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: ABS ECU 1999  (Read 732 times)

0 Members and 1 Guest are viewing this topic.

...Matski...

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 12
    • View Profile
ABS ECU 1999
« on: 24 February 2011, 10:43:16 »

Assuming I fit an abs ecu from a different engine do I need to program the engine and trans on a 1999 (B) with a tech 2? Or can I just fit it?

Thanks,
Matt.
« Last Edit: 24 February 2011, 10:44:20 by ...Matski... »
Logged

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36266
    • Jaguar XE 25t, Westfield
    • View Profile
Re: ABS ECU 1999
« Reply #1 on: 24 February 2011, 10:51:21 »

The ABS ECU does need to be coded with engine type and auto/manual. Best to find one from an identical spec. car if possible.

Kevin

EDIT: to say that there are more major differences between versions fitted in earlier / later cars and between 4 pot / v6 / diesel cars.
« Last Edit: 24 February 2011, 10:52:32 by Kevin_Wood »
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

...Matski...

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 12
    • View Profile
Re: ABS ECU 1999
« Reply #2 on: 24 February 2011, 10:52:46 »

OK thanks, a breaker is insisting that the early ones don't, he also says the later ones don't.

Thought as much.

It's from a 3.0, mines a 2.5.
« Last Edit: 24 February 2011, 10:54:01 by ...Matski... »
Logged

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36266
    • Jaguar XE 25t, Westfield
    • View Profile
Re: ABS ECU 1999
« Reply #3 on: 24 February 2011, 10:55:15 »

You could probably get away with a 2.5 / 3.0 mismatch but transmission type will be a show stopper if wrong, I think.

Best to hold out for the right one unless you have access to a Tech 2 - or get your old one refurbed?

Kevin
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

...Matski...

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 12
    • View Profile
Re: ABS ECU 1999
« Reply #4 on: 24 February 2011, 11:01:48 »

The daft thing is the breaker has a 2.5 one, it was the one listed on eBay. I specifically confirmed I wanted a 2.5 one so I didn't have to reprogram, he said you don't need to and sent the 3.0 one to prove a point I believe.

Thanks for your help.
Logged
Pages: [1]   Go Up
 

Page created in 0.03 seconds with 21 queries.