Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: robson on 15 December 2018, 09:23:45
-
This is a known area for wire breakage after continual flexing mine has failed twice , soldered joints are too rigid and soon fail.Is it best to insert a long length of wire so that the joint is away from the hinge or has someone found a better cure.
-
Given Omega parts are freely available, I'd probably replace the boot loom.
-
I too have had a wiring break in the loom around the near side boot hinge. (boot central locking stopped working)
First attempt at a repair soon failed again at the joint where I had soldered the wires together.
As you have suggested, for my second attempt, I spliced in a longer set of wires so that the solder joints are no where near to the area of flex.
12 months on and no failure as yet.
-
A spiral of cable should minimize the risk of breakage :y