Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega General Help / Re: 2,6V6 using coolant.

« on: 03 December 2020, 16:04:49 »

Two similar pumps in my 2.6, too. But they cannot leak between heads...

That was what I was thinking too.
Must be termostat or oilcooler. 
The engine only gets to 80C, so I think I will get a new termostat first and see what happens. 

2

Omega General Help / Re: 2,6V6 using coolant.

« on: 02 December 2020, 15:32:32 »

I did the Cleaning of the V6 crankcase breather setup today, and had a look down under the plenum. Around the termostathousing  was plenty of debri from coolant. So I think the leaking is somwere between the two cylindertops. ( Termostathousing, oilcooler....).
I did not have time to dig further down,  but I will as soon as there is time and I don't need the car for a cuple of days.

Petter

3

Omega General Help / Re: Intermittent starter motor issue

« on: 01 December 2020, 19:38:17 »

I have the  same problem with mine now. It tends to not want to start when damp weather, so I guess this has to do whith the lubricating getting dry after so many years.
One guy at my local garage said it culd be bad grounding...

Did you solve this problem?

4

Omega General Help / 2,6V6 using coolant.

« on: 01 December 2020, 17:04:21 »

Hi, My 2001 2,6V6 omega has lately started to use coolant. 
I wonder if there are some kind of  self bleeding on the coolingsystem.
Because the coolant seems to disapear after engine is turned off, after engine has been running for some time and is warm (82C)
The milage on the car is 266000km.
Petter H

5

Omega Electrical and Audio Help / Re: Problems retrofitting NCDR 2011 in my elegance.

« on: 24 October 2020, 07:54:59 »

Best advice is not to use it. But definitely don't use it for programming. Ever.

Good thing is that it is not posible to do it with "My Naff Code Reader", you have to use tech-2 

6

Omega Electrical and Audio Help / Re: Problems retrofitting NCDR 2011 in my elegance.

« on: 17 September 2018, 19:48:01 »

Anybody who knows which settings I need to use to connect VAUX COM to my 2001 omega elegance?
Petter 

7

Omega Electrical and Audio Help / Re: Problems retrofitting NCDR 2011 in my elegance.

« on: 17 September 2018, 06:00:03 »

  Thanks so much. The guy on the local Opel garage told me he needed the pairing code. But I did not believe him. I think it is just because there's so few of those ncdr20** in Norway do he did not know and wanted to be on the safe side.
Petter

8

Omega Electrical and Audio Help / Re: Problems retrofitting NCDR 2011 in my elegance.

« on: 16 September 2018, 18:41:41 »

CID needs code index 074 for a HID equipped 2.6/3.2.

But do I need the pairing code ? Because I did not get it when I bought the radio.

9

Omega Electrical and Audio Help / Re: Problems retrofitting NCDR 2011 in my elegance.

« on: 16 September 2018, 14:58:53 »

 Solved the problem. It was poor contact in the can buss . 
Problem now is the boardcomputer is reading data from the car, thinking it is an 2,2diesel not 2,6V6.  So the readings is wrong.
Do I have to have the codes for cid and headunit toget this sorted whit tech 2?
Petter

10

Omega Electrical and Audio Help / Re: Problems retrofitting NCDR 2011 in my elegance.

« on: 24 November 2017, 23:31:44 »

Hi.
I have bought an NCDR 2011 and Cid display for my 2001 omega 2,6v6 elegance
I had to add a few ekstra cables for the display and I'm pretty shore the cables are correct now.
The display works perfect except from no contact whit the radio.
The problem is that the head unit seems to be defective.  The symptoms are as follows, no contact whit the Cid, radio turns on and search a radio station . I can't change Chantal or program  it. If I put in a cd everything seems normal,  cd spinns up and the radio is muting, getting ready to play the cd. Then nothing.... No sound at all. When I try to push nav or bc, nothing happens.
I am a professional radio repairman, but can't figure this out. 
The donor car was a 2,2 diesel, and the seller told me everything was working before he took it out of the car.
What could be the reason for this fault symptoms. 
Can anyone help me gett the schematics for the ncdr2011?

Petter Halonen

I got myself an" op com diagnostic interface". I hope I can find out something more with that, at least I can see if there are any connection between the canbus and the radio.

Another symptom I noticed tonight is that when I turn of the radio, the lights in the steering wheel switches still is on, and that is strange... 
Help!

Petter H

11

Omega Electrical and Audio Help / Re: Problems retrofitting NCDR 2011 in my elegance.

« on: 18 November 2017, 07:36:38 »

That unit was never offered in the Omega in the UK... But sounds like the laser in it is knackered

It was offered in Norway for 21400kr. It is the same as ncdc2013 but without the cdchanger.

I think it is much more serius than a the laser. I think something is wrong whit the cpu or flash.
Petter

12

Omega Electrical and Audio Help / Re: Problems retrofitting NCDR 2011 in my elegance.

« on: 17 November 2017, 20:44:19 »

Hi.
I have bought an NCDR 2011 and Cid display for my 2001 omega 2,6v6 elegance
I had to add a few ekstra cables for the display and I'm pretty shore the cables are correct now.
The display works perfect except from no contact whit the radio.
The problem is that the head unit seems to be defective.  The symptoms are as follows, no contact whit the Cid, radio turns on and search a radio station . I can't change Chantal or program  it. If I put in a cd everything seems normal,  cd spinns up and the radio is muting, getting ready to play the cd. Then nothing.... No sound at all. When I try to push nav or bc, nothing happens.
I am a professional radio repairman, but can't figure this out. 
The donor car was a 2,2 diesel, and the seller told me everything was working before he took it out of the car.
What could be the reason for this fault symptoms. 
Can anyone help me gett the schematics for the ncdr2011?

Petter Halonen

13

Omega Electrical and Audio Help / Problems retrofitting NCDR 2011 in my elegance.

« on: 15 November 2017, 22:40:03 »

Hi.
I have bought an NCDR 2011 and Cid display for my 2001 omega 2,6v6 elegance
I had to add a few ekstra cables for the display and I'm pretty shore the cables are correct now.
The display works perfect except from no contact whit the radio.
The problem is that the head unit seems to be defective. The symptoms are as follows, no contact whit the Cid, radio turns on and search a radio station . I can't change Chantal or program  it. If I put in a cd everything seems normal,  cd spinns up and the radio is muting, getting ready to play the cd. Then nothing.... No sound at all. When I try to push nav or bc, nothing happens.
I am a professional radio repairman, but can't figure this out.
The donor car was a 2,2 diesel, and the seller told me everything was working before he took it out of the car.
What could be the reason for this fault symptoms.
Petter Halonen

14

Omega Gallery / Re: my -96 Opel Omega b 2.5v6 CD Estate

« on: 22 April 2017, 13:49:21 »

Finally picture of your Omega, Jan Egil.
Really beautiful car
I will put out a pic of mine soon.

15

Omega Gallery / Re: My 2.5 V6 CDX, year 2000 Facelift Estate

« on: 30 August 2016, 12:45:10 »

  Nice looking omega!
I like the silverstar color.
I got a Zafira b in that color.
Did you find much rust on the heat shield above the pot ?
This is just what I'm planing to do whit my 2,6v6 elegance.