Keith /Albs . . . thanks for replies . . . so . .only MOT'd 1st October . . & IF the headlights were too high on the manual adjustment would it not have failed or at least been an advisory?
I will try the start up test close to a wall & see what happens . I know both sensors & rods are ok . There is no warning showing ( which is what usually happens when a rod pops off)
Im guessing that the brittle adjusters just snap when trying to adjust . . so best left alone if no real issue.
The "flashing" from on coming vehicles has only been on 2 or 3 occasions , so maybe it is just the brightness of the xenons . . .not sure . but will look into it .
Will look now to see if there is a guide to actually adjusting the headlights. Need to find out where the screws are to adjust & what screw does what