1
Omega General Help / Re: Brakes
« on: 19 April 2024, 13:26:10 »
Have you checked that the slider pins on the front calipers are free to move? From your description it might be that one side is seized. If so, buff the pins and rubber boots and re-grease. Or replace with new pins and rubber boots. And clean the bores.
The rear caliper will be ATE, Ø42mm pistons for vented rear discs and Ø40mm for solid rear discs.
The fronts with Ø296mm discs are TRW which is now a subsidiary of ZF. Seem to have been manufactured by Lucas Girling under license. Piston Ø57mm.
The rear caliper will be ATE, Ø42mm pistons for vented rear discs and Ø40mm for solid rear discs.
The fronts with Ø296mm discs are TRW which is now a subsidiary of ZF. Seem to have been manufactured by Lucas Girling under license. Piston Ø57mm.