Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tigers_gonads]

Finished rebuilding the dash ect this afternoon so tonight, I've just been for a blast up the M62 
In its self, the car is going, eh very well   

Right, the very weird bit 
Select cruise in any gear between 2 and 4 and it works perfectly 
You can adjust the speed up and down and it totally disengages with a touch of the brake or clutch pedal 
BUT select cruise in 5th and it totally fails to engage regardless of vehicle speed or engine speed 
No eml or anything.

Car is a 3.2 that has been converted to manual 

[Entwood]

Finished rebuilding the dash ect this afternoon so tonight, I've just been for a blast up the M62 
In its self, the car is going, eh very well   

Right, the very weird bit 
Select cruise in any gear between 2 and 4 and it works perfectly 
You can adjust the speed up and down and it totally disengages with a touch of the brake or clutch pedal 
BUT select cruise in 5th and it totally fails to engage regardless of vehicle speed or engine speed 
No eml or anything.

Car is a 3.2 that has been converted to manual 

Instant thought .. is the cruise ECU from a manual or an auto ?? as the auto only has 4 gears, perhaps the ecu does not recognise "5th"... but I know knowt about ECU configurations ...perhaps it needs a chat with a tech2  to tell it that it's now a manual ??

[ronnyd]

Too many pedals?

[GastronomicKleptomaniac]

Instant thought .. is the cruise ECU from a manual or an auto ?? as the auto only has 4 gears, perhaps the ecu does not recognise "5th"... but I know knowt about ECU configurations ...perhaps it needs a chat with a tech2  to tell it that it's now a manual ??

Eeee he could well be right here.

Doesn't take too long to reprogram to manual

[tigers_gonads]

Finished rebuilding the dash ect this afternoon so tonight, I've just been for a blast up the M62 
In its self, the car is going, eh very well   

Right, the very weird bit 
Select cruise in any gear between 2 and 4 and it works perfectly 
You can adjust the speed up and down and it totally disengages with a touch of the brake or clutch pedal 
BUT select cruise in 5th and it totally fails to engage regardless of vehicle speed or engine speed 
No eml or anything.

Car is a 3.2 that has been converted to manual 

Instant thought .. is the cruise ECU from a manual or an auto ?? as the auto only has 4 gears, perhaps the ecu does not recognise "5th"... but I know knowt about ECU configurations ...perhaps it needs a chat with a tech2  to tell it that it's now a manual ??

That was my first thought Nige but the manual gearbox has no electrical connection other then a switch for the reverse lamp 

The Auto gearbox ECU has been totally disconnected and the car has had a couple of trips to Marks gaff for various updates including the one to tell the main ecu that its a manual 

I'm wondering that due to the clutch switch and wiring back the main ecu only just been completed, the relevant programming didn't take 
 

[tigers_gonads]

The cars a DBW throttle so no separate cruise ecu.
Its all done via the main engine ecu

[tigers_gonads]

Too many pedals?

   

[Andy B]

Too many pedals?

   

But you know that Ronny is right .........  ....

[Doctor Gollum]

Unplug the auto ecu if not already done... Top in the auto will be a similar ratio to 4th on the manual... Engine ecu is probably confused ta fook

[tigers_gonads]

Too many pedals?

   

But you know that Ronny is right .........  ....

Eh, we've been here before remember 



And the answers still the same 

[tigers_gonads]

Unplug the auto ecu if not already done... Top in the auto will be a similar ratio to 4th on the manual... Engine ecu is probably confused ta fook

Gearbox ecu totally unplugged Al 

[Kevin Wood]

What diff ratio do you have?

[tigers_gonads]

What diff ratio do you have?

We kept the original 3.9 diff off the automatic Kev.

[Doctor Gollum]

Might need a couple of pins removing from the ecu plugs to balance the one fitted... will do some further digging

Also bear in mind that cruise doesn't normally work above a certain speed... 130 springs to mind

[tigers_gonads]

Might need a couple of pins removing from the ecu plugs to balance the one fitted... will do some further digging

Also bear in mind that cruise doesn't normally work above a certain speed... 130 springs to mind

 

Do tell me more