Topic: *Admin pls move to wanted* wanted 3.0 plenum Acc bracket (Read 4074 times)

2.5v6 · « **on:** 03 June 2017, 11:32:06 »

Hi guys searching for the 3.0 bracket where the Acc cable sits on plenum....

biggriffin · « **Reply #1 on:** 03 June 2017, 15:39:52 »

Another 213 till you can

Jimbob · « **Reply #2 on:** 03 June 2017, 16:22:44 »

Wanted is ok, but no sales sorry.

2.5v6 · « **Reply #3 on:** 03 June 2017, 17:22:59 »

Wanted is fine, thanks for moving I just need that bloody clip!!!

minifreek · « **Reply #4 on:** 04 June 2017, 20:39:11 »

What bloody clip is it.....?

Have you maybe a picture...?

I might have 1 in my box of many things, thats in my shed of many things.....

2.5v6 · « **Reply #5 on:** 04 June 2017, 22:45:07 »

It's where the accelerator and cruise cable sit on the plenum on the left hand side when looking in front of the engine bay, it's needs to be off a 3.0 long nose plenum as they differ from 2.5 models..I did try and email you last week but you're inbox is full

minifreek · « **Reply #6 on:** 05 June 2017, 10:46:18 »

I happen to still have a longnose plenum, and thinking it may still have the bracket on it too....

Give me a chance to find it, then I'll get back to you

minifreek · « **Reply #7 on:** 05 June 2017, 10:47:09 »

Inbox is now pruned too

2.5v6 · « **Reply #8 on:** 05 June 2017, 10:48:35 »

Haha thanks!!!

minifreek · « **Reply #9 on:** 05 June 2017, 14:10:02 »

Is this the part you are requiring....?

2.5v6 · « **Reply #10 on:** 05 June 2017, 14:26:53 »

Yes it is

what other treasures do you have?

minifreek · « **Reply #11 on:** 05 June 2017, 14:38:37 »

Depends on what you're after....?

I have no injection manifolds left, I threw 4 of them away, complete with injectors...

I do have a couple of sets of G and A cams to give you POWAAAAAHHHHHHHHHHHHHH.....!!!

It did on mine anyway

but I did do quite a bit of work on it too....

2.5v6 · « **Reply #12 on:** 05 June 2017, 14:45:21 »

If you have a 3.0 accelerator cable

as the 2.5 is shorter if I'm correct, I've fitted in G cams on the inlet side standard on exhaust cams....I'm just missing the low end grunt! what I'm I missing???

minifreek · « **Reply #13 on:** 05 June 2017, 15:05:13 »

The 2.5 cable WILL fit the longnose plenum _ I did it on mine without any problems...

You need to fit the G cams on the exhaust and a pair of A cams on the inlet to get back the low end grunt, coupled with the longnose plenum you will get most if not all the torque back... also fit a blanking plate to the ECV and you will get sharper response from the throttle... If you can stretch to it, get the heads ported too...

minifreek · « **Reply #14 on:** 05 June 2017, 15:13:52 »

#EGR Valve that should have read...

2.5v6 · « **Reply #15 on:** 05 June 2017, 15:18:02 »

I thought the G cams go on the inlet

.....what if G cams fitted on all four cams? already made a plate for the EGR valve, how many beer tokens are we talking for the plenum clip and the cams?

2.5v6 · « **Reply #16 on:** 05 June 2017, 15:21:54 »

I thought the G cams go on the inlet

.....what if G cams fitted on all four cams? made up a blanking plate for the EGR valve? how many beer tokens are we talking for the plenum clip and the cams?

2.5v6 · « **Reply #17 on:** 05 June 2017, 15:23:15 »

my bad posted twice!

minifreek · « **Reply #18 on:** 05 June 2017, 16:02:55 »

I always get that bit wrong, if you fit the A cams along with G cams you will gain extra torque and power which you will lose with fitting 4 G cams...

Fitting the longnose plenum you will also gain extra torque...

The clip thing, you can have for postage, the cams £25 plus postage but you take the risk of them getting broken by the courier - I can pack them as best I can but can't guarantee their safety

I'll take a look at them and see if they're still OK to use, Iv not seen them since removing them from mine last year but I know where they are...

2.5v6 · « **Reply #19 on:** 05 June 2017, 19:31:17 »

Cool PM with details and we'll get this sorted

2.5v6 · « **Reply #20 on:** 16 June 2017, 11:38:23 »

My search continues for this bracket! Yodel the plonkers lost the parcel so if anyone else can help..

News:

Author Topic: *Admin pls move to wanted* wanted 3.0 plenum Acc bracket (Read 4074 times)

Author Topic: Admin pls move to wanted wanted 3.0 plenum Acc bracket (Read 4074 times)