Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[The Red Baron]

having had another run out, on petrol only, im getting the tc light come up.
read the codes..
48 battery low voltage. i find this rather odd tbh.
38 02 circuit 1 low voltage
98 02 circuit 2 low voltage.
mmm
could this be lpg related?.

[JamesV6CDX]

having had another run out, on petrol only, im getting the tc light come up.
read the codes..
48 battery low voltage. i find this rather odd tbh.
38 02 circuit 1 low voltage
98 02 circuit 2 low voltage.
mmm
could this be lpg related?.

Sorry mate I would have loved to have popped in but was really up against clock.

I don't think it's LPG related.

Few things to check and confirm..

1) The three earths on the rear of the 2-4-6 head - are they secure? I'm sure you haven't put them all under just one bolt, to save doing up the three, have you

2) Electrical round connectors by battery - all home

3) What is the voltage measured across the battery with engine running

4) Are all electrical connectors etc home?

The TC light constantly on might also be result of a poor connection/earth somewhere disturbed during HG change.

I'm doing a job in Leicester tomorrow. Again, I'm really sorry to be so vague, but on the offchance I get away in good time, I will give you a bell and try and pop in and give you a second pair of eyes.

I'd say don't run it on LPG at all, until everything is hunky dory on petrol

[The Red Baron]

thanks for the above advice james, im keeping 
 

[JamesV6CDX]

thanks for the above advice james, im keeping 
 

I knew it 

Seriously - correct that first. It might be worth scraping your knuckles..

As I say, happy to pop in for a cuppa and a gander if I get time

Do you have facilities to read the codes logged for the TC?

[The Red Baron]

no, can only do paper clip. what a twonk i am.

[JamesV6CDX]

no, can only do paper clip. what a twonk i am.

It would be good to know what it's complaining about. I have something which should read the codes.

It's also possible those codes aren't there anymore - as with the clip there's no way of telling if they're present or historic.

We need to clear out all the codes and look at it with a clean slate

[Entwood]

no, can only do paper clip. what a twonk i am.

It would be good to know what it's complaining about. I have something which should read the codes.

It's also possible those codes aren't there anymore - as with the clip there's no way of telling if they're present or historic.

We need to clear out all the codes and look at it with a clean slate

Interesting item to have in a tool box ... what size piece do you recommend ?? ... is there any special way to hold it for maximum benefit ?? Are new pieces from http://www.museumwales.ac.uk/en/slate better than pieces nicked off the church roof

 

[The Red Baron]

no, can only do paper clip. what a twonk i am.

It would be good to know what it's complaining about. I have something which should read the codes.

It's also possible those codes aren't there anymore - as with the clip there's no way of telling if they're present or historic.

We need to clear out all the codes and look at it with a clean slate

Interesting item to have in a tool box ... what size piece do you recommend ?? ... is there any special way to hold it for maximum benefit ?? Are new pieces from http://www.museumwales.ac.uk/en/slate better than pieces nicked off the church roof

 

 

[The Red Baron]

Now sorted & goes like hot snot.   

[JamesV6CDX]

Just read your PM on the laptop. Cracking stuff.