Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[omega3000]

Is that 4 teeth out then 

http://s1226.photobucket.com/albums/ee402/webbybear1/?action=view&current=MOV003.mp4

Guess that would make it sound like that 

[Webby the Bear]

mini meet at webbys on saturday then 

  seriously, got plenty of beer.... come down if you're free. i have all but lost the wife through my endeavours so i need all the company i can get. but hey, at least ralf may work... thats the main thing 

[martin42]

ive got sod all to do so would be good to meet up,if steve wants to get a lift with me more than welcome to,give me a chance to show him how mine drives 
dam does that i have to clean mine now 

[omega3000]

ive got sod all to do so would be good to meet up,if steve wants to get a lift with me more than welcome to,give me a chance to show him how mine drives 
dam does that i have to clean mine now 

Depends what time if its sat , have to be back by 1pm but more than happy to hitch a ride in the MV ...i like slower cars 
Dont clean it its going to be Chucking it down sunny 

[Webby the Bear]

ill give you my address tomorrow if ya like when i find out what time im gonna be there.... gonna break to watch the saints in the semis of the AP so will let you know

[omega3000]

ill give you my address tomorrow if ya like when i find out what time im gonna be there.... gonna break to watch the saints in the semis of the AP so will let you know

 

[SMD]

Whats "crank at TDC"?

[Webby the Bear]

Whats "crank at TDC"?

crank pulley at ''top dead centre''..... crank turns twice for every 1 turn of the camshaft.... on the second turn of the crank when you bring the crank to TDC the notches on the cams are supposed to line up with the marks on the plastic casing........ as you can see from pic 1 cam number 1 well out 

[SMD]

Sense a new 'Omega Mechanic' do I, in the making. Watch out lads

Cheers

[Webby the Bear]

Sense a new 'Omega Mechanic' do I, in the making. Watch out lads

Cheers

hahaha i'm only repeating what i've learnt from these guys.

i defo reccomend the cambelt dvd. for £3 the amiunt you learn is great..... i'm very sad and have watched it over 20 times quite a lot 

[Lazydocker]

I think you should get away with that as it's the exhaust cam that's advanced

Certainly worth re-timing with the existing belt. Although I'd be interested in why it jumped because I'm sure it couldn't have been done like that from the start

[Webby the Bear]

I think you should get away with that as it's the exhaust cam that's advanced

Cheers Lazy,

that seems to be the consensus.....ill tell you sunday 

[The Red Baron]

I think you should get away with that as it's the exhaust cam that's advanced

Certainly worth re-timing with the existing belt. Although I'd be interested in why it jumped because I'm sure it couldn't have been done like that from the start

i think so too, i had a 3.0l the same, set it up & all was ok. 

[The Red Baron]

I think you should get away with that as it's the exhaust cam that's advanced

Cheers Lazy,

that seems to be the consensus.....ill tell you sunday 

BOOM


sorry web, lmfao. 

[Webby the Bear]

I think you should get away with that as it's the exhaust cam that's advanced

Cheers Lazy,

that seems to be the consensus.....ill tell you sunday 

BOOM


sorry web, lmfao. 

hahahahaha!!!! believe me ive thought about it.

and its a very good point.... if this thing does throw a rod (i believe thats the term for when a valve shoots out the engine  ) is it likely the carnage will be contained in the engine...... dont facy turning up to A&E with no head..... or even worse a bad case of erection loss