Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[TheBoy]

Webby, IIRC, cam 1 should have 2 numbers on it, a 1 and a 2. These should be next to the 2 'groves' - one of which is tippexed.

What I'm hoping is that the tippexed one has a '2' next to it, and the untippexed has a '1' next to it. If so its only a tooth or 2 out


Hope that clarifies what Marks DTM and JamesV6 was trying to say

[JamesV6CDX]

Webby, IIRC, cam 1 should have 2 numbers on it, a 1 and a 2. These should be next to the 2 'groves' - one of which is tippexed.

What I'm hoping is that the tippexed one has a '2' next to it, and the untippexed has a '1' next to it. If so its only a tooth or 2 out


Hope that clarifies what Marks DTM and JamesV6 was trying to say

That's exactly what I was getting at.. Thanks TB 

[Webby the Bear]

Thanks chaps.

Ok, here is cam 1 with crank at TDC...

[The Red Baron]

oh boy, 4 out. 

[TheBoy]

Oh break me, yes

Is it down on power (one for bigyin54 I guess), that doesn't look good. Really doesn't.  What mongrel did that?

[Webby the Bear]

Just so we get this absolutely clear as I know I can be retarded...... when I say the crank is at TDC..... that's when the line/notch on the crank is at 6 o'clock, right?

[martin42]

depends on am or pm lmao 

[Webby the Bear]

depends on am or pm lmao 

  i knew youd say that

[TheBoy]

Just so we get this absolutely clear as I know I can be retarded...... when I say the crank is at TDC..... that's when the line/notch on the crank is at 6 o'clock, right?

yes

[Webby the Bear]

Just so we get this absolutely clear as I know I can be retarded...... when I say the crank is at TDC..... that's when the line/notch on the crank is at 6 o'clock, right?

yes

Then we got problems!!! lol

Is it possible that it could be a tensioner failure that's caused this?

I double checked the other sprockets. they are all roughly spot on using the marks on the casing.

[martin42]

Webby you know you wanted to a head gasket,looks like your doing a complete top end rebuild 

[Webby the Bear]

Webby you know you wanted to a head gasket,looks like your doing a complete top end rebuild 

Is that cos you're predicting the valves will all be bent?

Then fekking bring it on. Most fun i've had since i bought my first adult magazine!!!!!!

[martin42]

your so easily pleased 

[omegod]

Webby you know you wanted to a head gasket,looks like your doing a complete top end rebuild 

Is that cos you're predicting the valves will all be bent?

Then fekking bring it on. Most fun i've had since i bought my first adult magazine!!!!!!

Spat my coffee at that one

[JamesV6CDX]

Was it running OK before you took the cambelt cover off?