Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Lookitt]

Hello,

After changed my battery on Omega X30XE years = 2000, I've seen that I haven't any sound from Radio, or Navigation, or Cd pLayer. Even if I turn the knob from station or from driving, nothing. I've looked at the fuse box but all is right. I've done something wrong ? Can you help me ?
Thanks

[ronnyd]

Have you put the code back in to activate the unit, IF you have it.?  Best of luck.

[Lookitt]

Thanks for you answer. 

No code is asked me. My station Siemens NCDC2013 works when I turn on the radio, CDC, Navigation, it's OK but no sound and no radio station. In station radio list, it's written 0 kHz instead of NRJ or other radio list. When I push AutoStore 10 seconds the station reboot and no code is asked me. So, I don't understand what I should do.

I think there's no one who had this problem, isn't it ? Mystery ? 

[jonny2112]

If all you did was in relation to the battery, then it does suggest a code issue if appropriate, or perhaps there is a more technical issue peculiar to 2013?

[Lookitt]

Yes it's arrived since I've changed my battery. Maybe a code is required but how or where write ? There's nothing asked on board computer 

[VXL V6]

Does this vehicle have Bose?

[zirk]

Does this vehicle have Bose?

Was just thinking that myself, Amp? 

[Lookitt]

Yes ! It's a Siemens NCDC 2013 with Bose Sound System 

[RobG]

Double check fuse #6 for the Bose amp.
If the radio can`t lock on to a radio station check the 12v "aerial' feed from back of radio.

[Lookitt]

I've already check fuse #6, it's Ok !
The 12v "aerial" from back of radio also.

[zirk]

Thanks for you answer. 

No code is asked me. My station Siemens NCDC2013 works when I turn on the radio, CDC, Navigation, it's OK but no sound and no radio station. In station radio list, it's written 0 kHz instead of NRJ or other radio list. When I push AutoStore 10 seconds the station reboot and no code is asked me. So, I don't understand what I should do.

I think there's no one who had this problem, isn't it ? Mystery ? 

No code is needed as the security feature on these HU's is that it is paired to the Radio Screen, having re read this, the displaying 0 Khz would worry me a bit, Im starting to wonder whether the HU has lost its on board configuration set up by disconnecting the Battery? 

Im guessing these have Flash Memory on board, if so, anyone know if the configuration file is in there somewhere in form of a erasable eprom or similar?   

[Lookitt]

Yes, I think there is a memory somewhere because after changed my battery, all stations radio were preserved.

I've forgotten to say that, if "0 kHz" is written instead of the name of radio, it's appaeared since after pressing "AS" button for 10 seconds wich restrated the NCDC2013. Before I touch this button, all radios was written on board but no sound. Now, all radios have disappeared and all 10 stations are written 0 kHz. Autostore doesn't work, I can't search radio, it doesn't work, the Update of radio list doesn't work. But navigation and CDC work...

[pscocoa]

EEPROM

http://fl0rian.wordpress.com/2013/04/10/fixing-the-ncdc-2015-0khz-failure/

[Lookitt]

 

Ouch !

Thanks for this link. It's more serious that I thought. 

I don't understand why nobody had this problem after battery changed. It's not explained in manual Opel or Vauxhall

[zirk]

theres been a couple of Posts lately where NCDC's have lost their coding or pairing after being disconnected from the battery for a while, which was one of the reasons I thought about yours losing its config settings.