Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

301

Meetings, gatherings, parties etc / Midlands ABS / OOF meet - Sunday 8th March

« on: 02 March 2009, 21:44:26 »

At the rear of the Plank and Leggit public house, 12 Noon start.

http://www.pub-explorer.com/derbyshire/pub/plankandleggit.htm

302

Meetings, gatherings, parties etc / Midlands ABS / OOF Meet - Sun 8th February

« on: 01 February 2009, 23:30:10 »

As usual, at the rear of the Plank and Leggit public house, 12 Noon start.  

http://www.pub-explorer.com/derbyshire/pub/plankandleggit.htm

303

Meetings, gatherings, parties etc / Midlands ABS / OOF Meet - Sun December 14th

« on: 09 December 2008, 19:29:07 »

Starting 12 Noon at the Plank & Leggit Public House - Rear Car Park.

http://www.thomsonlocal.com/Plank-&-Leggit/0147014608606233000/map/companyinfo.html

 

Unfortunately I won't be able to attend this one.....  

304

Meetings, gatherings, parties etc / Midlands ABS / OOF Meet - Sun 12th Oct

« on: 05 October 2008, 19:52:48 »

12 Noon start at the Plank and Leggit public house, pub has now fully reopened so meeting point is back to the rear car park behind the pub.

http://www.pub-explorer.com/derbyshire/pub/plankandleggitsawley.htm

For those attending the earlier Rolling Road session please see seperate posting for further information.

305

Meetings, gatherings, parties etc / Midlands ABS / OOF Meet - Sun 14th Sep

« on: 08 September 2008, 22:59:25 »

As usual 12:00 Start, please note slightly different parking area as below.

NB. If you are attending next months Rolling Road then this is an ideal opportunity to pay the deposit to Brian.  


Quote from Brian:-

'The pub is having a refit so closing down at 6pm on Sunday the 14th.

Usual parking place may be taken up with containers so we will park at the front nearest to the road as you come in.

I have cleared this with the staff so turn right as you enter the car park.

Still noon start.

linc- http://www.pub-explorer.com/derbyshire/pub/plankandleggitsawley.htm'

306

Meetings, gatherings, parties etc / Midlands ABS / OOF meet - Sun 10th

« on: 06 August 2008, 11:12:35 »

Plank & Leggit Pub
Tamworth Road
Sawley
Long Eaton
Nottingham
NG10 3AD

Noon start, family friendly pub with outdoor facilities.  

Unfortunately I won't be around for this one so can someone remember a camera please!!!!

307

Meetings, gatherings, parties etc / Midlands ABS / OOF Meet - 13th July

« on: 06 July 2008, 18:44:35 »

From 12:00

Plank & Leggit Pub
Tamworth Road
Sawley
Long Eaton
Nottingham
NG10 3AD

308

Meetings, gatherings, parties etc / Midlands ABS/OOF Meet - 8th June

« on: 02 June 2008, 21:25:41 »

Plank & Leggit Pub
Tamworth Road
Sawley
Long Eaton
Nottingham
NG10 3AD

Noon start

309

Meetings, gatherings, parties etc / Midlands ABS/OOF meet - 11th May

« on: 04 May 2008, 10:11:28 »

New location from now on. Still the second Sunday in each month.

Plank & Leggit
Tamworth Road
Sawley
Long Eaton
Nottingham
NG10 3AD

Noon start, Sunday 11th of May.

1) From South come off the M1 at Junction 24.
2) Take the 2nd exit off the island A6/A50
3) Roughly 3/4 mile take the slip road off the A50 marked Long Eaton
4) Take the 5th exit off the island marked Long Eaton
5) Roughly 1/2 mile Plank & Leggit on right hand side.

1) From North come off the M1 at Junction 24A
2) Follow signs for A50/Derby
3) As above
4) As above
5) As above

1) From East (A453) over junction 24 M1
2) Take 4th exit off island A6/A50
3) As above
4) As above
5) As above

1) From West coming down the A50 come off at Junction 1 marked Long Eaton
2) Take the 2nd exit off the island marked Long Eaton
3) Plank and Leggit roughly 1/2 mile on right.

310

Meetings, gatherings, parties etc / ABS/OOF - Donnington Services - 13th April

« on: 06 April 2008, 12:08:56 »

Donnington Services J23A M1
Sunday 13th April

Any Omega welcome!

From 12 - 2 (Followed by a run up to the new location that will be used from May onwards).

311

Meetings, gatherings, parties etc / ABS / OOF Donnington - 9th March

« on: 03 March 2008, 09:01:30 »

This weekend, starts at 12:00 midday.

All welcome.

Unfortunately I won't be there as I have to work.  

312

Meetings, gatherings, parties etc / February ABS Donnington meet

« on: 04 February 2008, 09:26:16 »

Sunday 10th February from 12:00 at Donnington Services.

All welcome!

313

General Discussion Area / V6 Estate Exhaust

« on: 31 August 2011, 22:02:33 »

Spotted this on Ebay, it looks like it could possibly be a genuine exhaust judging by the clamshell design of the centre boxes.

http://www.ebay.co.uk/itm/Vauxhall-Omega-3-0-MV6-estate-CAT-back-exhaust-system-/120770372566?_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D5%26po%3DLVI%26ps%3D63%26clkid%3D2457340841693025800

Might be worth investigating if you are in the market for an estate V6 exhaust.

The auction is nothing to do with me.

EDIT: Sorry should be in car chat 

314

General Discussion Area / Big Thanks to Loo Knee

« on: 29 August 2011, 21:26:10 »

Yet again one of our cars has visited Loo Knee Towers for some work, this time a de-cat and new cat back exhaust fitting.

So I just wanted to say a big thanks to Daz for giving up his bank holiday Monday to perform the necessary surgery on Jane's Estate.

We now know how the Cat is constructed on 2.2DTi's and exactly how to open them up to make an MOT friendly de-cat! Needles to say it's a little more involved than first thought.

So once again a big thanks to Daz and a recomendation to anyone who is looking for someone to work on thier car 

315

General Discussion Area / Anyone work with Cisco?

« on: 16 June 2011, 23:22:23 »

Well I managed to crack the screen on my last remaining laptop with a 'proper' serial port today. Unfortunately my job involves a lot of configuration of network devices where a good old fashioned serial port is a must......

Up until now i've managed to keep hold of laptops that get returned so i've had a healthy supply of machines to keep me going but now the serial port appears to be a thing of the past and i'm now resigned to using a USB - Serial convertor (spit spit) so i'm looking for recommendations...

Must be well made and durable (got a stack of broken ebay cheapies here that aren't up to the job of constant plugging and unplugging) and must also be able to pass the Break sequence correctly which most can't....