Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: V6 Difficult to cold start  (Read 1114 times)

0 Members and 1 Guest are viewing this topic.

Matchless

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Nottingham
  • Posts: 1563
    • A white van
    • View Profile
V6 Difficult to cold start
« on: 11 January 2007, 10:00:09 »

Solved this one....might help someone else.

V6, wouldnt start on first turn of the key, usually started on second go but ran lumpy for a few seconds and exhaust smelt of petrol. Once running it behaved perfectly.

I was pretty sure it was an injector which was leaking fuel into the manifold over time, I have had to disconnect the fuel lines a couple of times recently (fuel filter and camcover gaskets) and each time there was no pressure in the fuel feed pipe.
I acquired another inlet manifold and injectors and swapped them at the w/e and it now starts first turn and idles cleanly straight away. Loosened the fuel feed union after 24Hrs and there was still pressure in the rail.

So that seems to confirm the diagnosis of an incontinent injector....it happens to us all with age...apparantly
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 105910
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: V6 Difficult to cold start
« Reply #1 on: 11 January 2007, 10:25:21 »

Quote
Solved this one....might help someone else.

V6, wouldnt start on first turn of the key, usually started on second go but ran lumpy for a few seconds and exhaust smelt of petrol. Once running it behaved perfectly.

I was pretty sure it was an injector which was leaking fuel into the manifold over time, I have had to disconnect the fuel lines a couple of times recently (fuel filter and camcover gaskets) and each time there was no pressure in the fuel feed pipe.
I acquired another inlet manifold and injectors and swapped them at the w/e and it now starts first turn and idles cleanly straight away. Loosened the fuel feed union after 24Hrs and there was still pressure in the rail.

So that seems to confirm the diagnosis of an incontinent injector....it happens to us all with age...apparantly
Glad you sorted it :y
Logged
Grumpy old man

Admin

  • Administrator
  • *****
  • Offline Offline
  • 0
  • Posts: 2595
    • View Profile
Re: V6 Difficult to cold start
« Reply #2 on: 11 January 2007, 17:29:36 »

Useful piece of information too. Thanks, I'll remember that. :)
Logged
The Administrator.
Pages: [1]   Go Up
 

Page created in 0.036 seconds with 18 queries.