Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: pass side washer jet prob  (Read 712 times)

0 Members and 1 Guest are viewing this topic.

0795omega

  • Junior Member
  • **
  • Offline Offline
  • 0
  • Posts: 238
    • View Profile
pass side washer jet prob
« on: 22 October 2010, 12:30:05 »

hi,my pass side washer jet kicks out no water at all,drivers side ok,have tried unblocking it with a safety pin in jets,but still nothing coming out bar a dribble down bonnet! anyone any idea? suppose have to take it out and re-new? cheers
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 105924
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: pass side washer jet prob
« Reply #1 on: 22 October 2010, 12:45:23 »

Generally dont block due to filter in washer bottle.

Is it heated or non heated type - I imagine heated is expensive, thus would try likes of Darth Loo-knee and co for 2nd hand one
Logged
Grumpy old man

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39483
    • ML350 TDM SmartRoadster
    • View Profile
Re: pass side washer jet prob
« Reply #2 on: 22 October 2010, 12:51:56 »

Quote
hi,my pass side washer jet kicks out no water at all,drivers side ok,have tried unblocking it with a safety pin in jets,but still nothing coming out bar a dribble down bonnet! anyone any idea? suppose have to take it out and re-new? cheers

Do you have access to an air compressor? A quick blast with the air line can help unblock a washer jet. It's best done removed from the washer tubing as any sh1te in there is just moved back and is able to block the jet again.
NB a heated jet isn't particularly cheap to replace just cos it's blocked.
Logged

0795omega

  • Junior Member
  • **
  • Offline Offline
  • 0
  • Posts: 238
    • View Profile
Re: pass side washer jet prob
« Reply #3 on: 22 October 2010, 13:16:49 »

think it is heated yes,as has two wires going into it at back,tried pulling off the pipe on it stuck on steadfast,13 years on there i suppose,frightened of damaging the bonnets skin from behind also,might leave it till mot time+ see if passes ok,if not let tester have a go at it,well fiddly!!
Logged

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39483
    • ML350 TDM SmartRoadster
    • View Profile
Re: pass side washer jet prob
« Reply #4 on: 22 October 2010, 13:22:40 »

Quote
think it is heated yes,as has two wires going into it at back,tried pulling off the pipe on it stuck on steadfast,13 years on there i suppose,frightened of damaging the bonnets skin from behind also,might leave it till mot time+ see if passes ok,if not let tester have a go at it,well fiddly!!

It's clipped into the bonnet via clips either side of the washer that you need to squeeze together to pop it from the bonnet. As for the tubing, don't try it cold, it's easy to break things off  ::) Warm the tubing with a hair dryer or with a heat gun -BE CAREFUL you don't melt things though ;)
The air line is likely to be the easiest fix  :y  :y
Logged

0795omega

  • Junior Member
  • **
  • Offline Offline
  • 0
  • Posts: 238
    • View Profile
Re: pass side washer jet prob
« Reply #5 on: 22 October 2010, 14:19:59 »

thanks for that,will give a try
Logged
Pages: [1]   Go Up
 

Page created in 0.027 seconds with 21 queries.