Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Shackeng on 02 August 2019, 16:54:28
-
'51 plate 3.2
As above with code 0130 which covers :
P0130 O2 Sensor Circuit High Voltage (Bank 1 Sensor 1)
P0130 O2 Sensor Circuit Slow Response (Bank 1 Sensor 1)
P0130 O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 1)
P0130 O2 sensor circuit malfunction (Bank 1 Sensor 1)
Where to next? :-\ :-\ :-\
-
I'd be looking at B1S1 Lamda ;)
Check its wiring first, as sometimes they can fall and snag. Unlikely its come unplugged of its own accord, but worth checking. Then replace it.
-
Which side is that Jaime?
-
135 ::)
Sensor nearest the manifold :y
-
135 ::)
Sensor nearest the manifold :y
Thanks. :y
-
Having bought the new sensor, and before fitting, the light has gone out! Haven't checked the pedal trick yet. I guess I might as well fit it anyway, as presumably it is likely to return. :-\ :-\ :-\
-
Having bought the new sensor, and before fitting, the light has gone out! Haven't checked the pedal trick yet. I guess I might as well fit it anyway, as presumably it is likely to return. :-\ :-\ :-\
Of course, the sensor could be just fine and the light came on due to a fueling glitch ::)
A bit of a drive around/some fresh fuel might have been all that was required ;)
-
Having bought the new sensor, and before fitting, the light has gone out! Haven't checked the pedal trick yet. I guess I might as well fit it anyway, as presumably it is likely to return. :-\ :-\ :-\
Of course, the sensor could be just fine and the light came on due to a fueling glitch ::)
A bit of a drive around/some fresh fuel might have been all that was required ;)
Is this common? I only ever use premium fuel in it. :-\
-
Not particularly, 0420/0430 being the factory fitted codes on a 3.2...
But a fault indication isn't automatically the sensor ;)
-
Not particularly, 0420/0430 being the factory fitted codes on a 3.2...
But a fault indication isn't automatically the sensor ;)
Didn't have either. :-\
-
Not particularly, 0420/0430 being the factory fitted codes on a 3.2...
But a fault indication isn't automatically the sensor ;)
Didn't have either. :-\
P0130 bummed or disconnected senor
may as well replace it if you have a new one
safe working ,PPE axle stands or ramp :y
-
Not particularly, 0420/0430 being the factory fitted codes on a 3.2...
But a fault indication isn't automatically the sensor ;)
Didn't have either. :-\
I know ;) just saying that they are the more common cat codes on the 3.2 :y
-
Not particularly, 0420/0430 being the factory fitted codes on a 3.2...
But a fault indication isn't automatically the sensor ;)
Didn't have either. :-\
P0130 bummed or disconnected senor
may as well replace it if you have a new one
safe working ,PPE axle stands or ramp :y
Thanks Dave. :y