Topic: vacuum gauge connection point (Read 494 times)

3.2 paisley wagon · « **on:** 01 February 2011, 13:36:36 »

Hi can anybody advise me where on my car to connect the 4mm airline coming from the vacuum gauge i have just bought?? Gauge diagram mentions the vacuum pipe on the air intake. :-?

Marks DTM Calib · « **Reply #1 on:** 01 February 2011, 13:37:53 »

Given its a 3.2, the feed to the vac reservoir on the front inlet bagpipes

3.2 paisley wagon · « **Reply #2 on:** 01 February 2011, 13:39:22 »

bagpipes?

3.2 paisley wagon · « **Reply #3 on:** 01 February 2011, 13:41:48 »

mark, are you refering to the small thin plastic pipe going from a t-piece off the brake servo to the multiram?

Marks DTM Calib · « **Reply #4 on:** 01 February 2011, 15:32:50 »

Yes although it should be going from a T-piece off the brake servo pipe to a vac tank on the base of the inlet bagpipes near the crank pulley (on which is mounted the front multiram).

3.2 paisley wagon · « **Reply #5 on:** 01 February 2011, 20:46:04 »

Got you now mark the black box at the bottom of the bagpipes with the two small vacuum pipes. Thanks

News:

Author Topic: vacuum gauge connection point (Read 494 times)

3.2 paisley wagon

vacuum gauge connection point

Marks DTM Calib

Re: vacuum gauge connection point

3.2 paisley wagon

Re: vacuum gauge connection point

3.2 paisley wagon

Re: vacuum gauge connection point

Marks DTM Calib

Re: vacuum gauge connection point

3.2 paisley wagon

Re: vacuum gauge connection point