Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[charlie]

As above can you run it on 4omh speakers at all?

[TheBoy]

yes.  Needs reconfig with Tech2, then all the bose amp/speakers ripped out

[charlie]

Interesting,What would i need to do to fit this into my project 2.2dti saloon,radio,gid, cage ,the wires from harness to cage, aerial wire,radio amp thing under parcel shelf ,aerial(or would you recommend a better aerial)and could the de-bosing and gid(if need to be,changed to a 2.2dti settings)be done by post. wink wink jamie

[charlie]

Indictor stalk aswell ??

[TheBoy]

Interesting,What would i need to do to fit this into my project 2.2dti saloon,radio,gid, cage ,the wires from harness to cage, aerial wire,radio amp thing under parcel shelf ,aerial(or would you recommend a better aerial)and could the de-bosing and gid(if need to be,changed to a 2.2dti settings)be done by post. wink wink jamie

Its not clear what you are trying to do - fit a ncdc from another car into a saloon? With or without bose?


I would not trust an NCDC to the post nowadays without going overboard on packaging.

[charlie]

YIp i was thinking about retro fitting it into a non bose car.but today i had a look at the bose wiring(the first time i looked,i thought,i would have no chance of getting it to work.)it looks simple, plus cost free.I will start another thread just to confirm what i thought today when looking at the harness.

[VXL V6]

What model Omega are you thinking of fitting it in?

[charlie]

I've a choose of two, both cd models.ive found a web page by a gentleman(the name escapes me at the mo)with a bit of a how two it may be nick angry :-/

[VXL V6]

Retrofitted one to the CD Estate but I also fitted the Bose which meant building a sub loom to break out the speaker outputs, +12V etc etc via a grafted in kick panel connector as non-Bose facelift cars don't have this connector in place unlike the pre-facelifts.

The extra wiring from thw NCDC to Display is minimal for a GID 

[charlie]

would i be right in thinking there 19 wires that need joining 8 speakers in ,8 speakers out and 1 earth/0 volts 1 ing live and 1 perment live  thats for the bose??? if that makes sense  

[TheBoy]

Remote on/off also reqd.

[charlie]

Would that be the red and white wire

[VXL V6]

Indeed!

[charlie]

would the feed for this come from no.6 or 7 on the top block(of the three)

[TheBoy]

would the feed for this come from no.6 or 7 on the top block(of the three)

Check the wiring diags for your radio, as the bose amp remote connection does vary...