Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Omega Nige

Pages: [1] 2 3 4 5 6
1
Omega General Help / Re: Fault code
« on: 25 October 2023, 10:30:51 »
Just checked nope, and no lights on the dash. Im going to disconnect the battery and see if that resets it. Im a member of the AA so I can call them out and see if they can see the fault in there kit. keep you posted. :y

2
Omega General Help / Fault code
« on: 24 October 2023, 19:44:21 »
Hi all, my 3.2 won't start again, not long since I replaced the crank sensor. It's now come up with the code P1792 ECM communication malfunction. Any ideas? Thanks 😊

3
Omega General Help / Re: Fault code
« on: 11 October 2023, 10:51:38 »
Hi,

Checked the plugs, ok, the wire to the knock sensor had a break in it, cut and soldered and fitted heat shrink to protect the wire. Cleared the code and now it is fine. By the way where is the knock sensor and how do you get to it?

Thanks for the help  :y

4
Omega General Help / Re: Fault code
« on: 10 October 2023, 22:15:55 »
Yep, fitted a new set of spark plugs, if that helps ?

5
Omega General Help / Fault code
« on: 10 October 2023, 19:57:14 »
Hi all

My spanner light is on, 3.2 V6 , code reader says no fault code. Peddle test 10 3 3 10. Cleared the code but comes straight back. Any ideas?

6
Omega General Help / Re: Cam covers leaking
« on: 09 October 2023, 11:42:02 »
Hi, thank you for your comments, I did fit new o rings and cleaned out the breather, torqued the bolts so maybe not enough silicone in the right places. I will have another attempt in the new year as the oil leaking is not excessive at the moment. Cheers  :)

7
Omega General Help / Cam covers leaking
« on: 06 October 2023, 11:36:29 »
Hi all, I fitted new gaskets about 2 yrs ago on my 3.2 cam covers and they are still leaking. The gasket was applied with black silicone, on the bed and behind the gasket, left for 24hrs before running the car to allow the silicone to go off. I need to re-do the gaskets as oil is getting onto the coil pack and around the spark plugs (I have just changed the spark plugs, coil packs ok and cleaned out). I know that the plastic covers are not great but don't want the expense of changing to ally ones. Any ideas? Thanks :y

8
Omega General Help / Re: Heater Fan
« on: 08 September 2023, 19:11:15 »
 Fan removed, found a mushed up card in the fan, dont know how it got in there ;D Now I just need to put everything back :)

9
Omega General Help / Re: Heater Fan
« on: 06 September 2023, 12:52:50 »
Air-con working fine so nothing open ;D I can feel the vibration if I put my hand on the fan motor. Glove box already out.

10
Omega General Help / Heater Fan
« on: 06 September 2023, 12:39:05 »
Hi, I just put my Omega in for an MOT, which it passed :) They turned off the heater fan for the MOT, when I switched it back on to drive home there was  a big vibration which sounded like I had plane inside! I do not seem to have any play on the fan so something else is vibrating. Any ideas?

Thanks, Nigel.

11
Omega General Help / Re: Disc back plate
« on: 24 July 2023, 14:41:53 »
Hi, thanks for all your comments, yes I am trying to source to the front brake disc shields. I'm the process of taking it all apart, the  nearside has some of the original left so hopefully I will be able to find something similar  :)

12
Omega General Help / Re: Disc back plate
« on: 20 July 2023, 17:38:45 »
Hi, my shields are non existent, nothing to paint!  ;D

13
Omega General Help / Disc back plate
« on: 18 July 2023, 18:10:09 »
Hi, I'm rebuilding my front calipers on my 3.2 and need to replace the back plate shield. Does anyone know where I can get a pair? Thanks 😊

14
Omega General Help / O2 sensor
« on: 22 May 2023, 13:01:19 »
Hi, on my 3.2 I keep getting a warning light o2 bank 2 sensor 1. Where is it on the exhaust? I clear it and it comes back on when crusing at about 40mph.

15
Omega General Help / Re: Management light.
« on: 04 January 2022, 14:18:27 »
Quick update, I un-plugged and re-plugged the knock sensor, bank 2 and moved the plug so it wasn't flapping about. Cleared the code and since then the light hasn't come back. Happy days  ;)

Pages: [1] 2 3 4 5 6

Page created in 0.03 seconds with 19 queries.