Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

no idea of the bulbs but front fog lights aren't included in the MOT 

Think H1s are the wrong bulb for the Irmscher lamps

I know I had to cut off the original plugs when I fitted mine but they were replaced with a different plug, but damned if I can recall the bulbs it came with.

It was bought new from Irmscher, so not previously interfered with, which second hand may have been.

The lamp casings were used on something else, Mundeo ST200 iirc... In which case H11 was quite probably what was fitted originally.

A "P1600" doesn't confirm the ECU is dead or faulty
it could be a damaged loom, connector pin, blown fuse .poor earth ,trapped wire or similar
even a sensor plugged in the wrong part of the loom or moisture ingress 
proper inspection and methodical diagnostics are required 

But it has been chipped, so much more likely the issue 

Me too, why vote for Lab/Con? Corrupt useless bastards🤬

thanks all, fortunately i have a handsome mechanic who will look after this error

A "P1600" doesn't confirm the ECU is dead or faulty
it could be a damaged loom, connector pin, blown fuse .poor earth ,trapped wire or similar
even a sensor plugged in the wrong part of the loom or moisture ingress 
proper inspection and methodical diagnostics are required 

A couple of my cars have a fog light out, and as the MOT's are due in a few weeks, thought a couple of new bulbs.. job done. But when I took one of the non working bulbs out ,it's an H1, and not knowing the history on the car I wouldn't know whether that is the correct bulb  fitment for the Irmscher bumper. I know that the H1 or the HB4 are for the standard Omega fog lights, but that H1 gets really hot in those small Irmscher fog light housings, and was wondering, if anyone knows what is the  correct bulb and required wattage is. TIA

Reform UK is the only option for me.

I kind of hope your right, as I dread Starmer and co having a big majority when they win.

Not sure who to vote for come the election.

Starmer is terminally dull and uninspiring while our nipple high PM also leaves me cold.

Neither will get my vote.

I don't have any problem when choosing who to vote for, because my vote will make no difference in Barnsley 

I kind of hope your right, as I dread Starmer and co having a big majority when they win.

Not sure who to vote for come the election.

Starmer is terminally dull and uninspiring while our nipple high PM also leaves me cold.

Neither will get my vote.