Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: annihilator on 11 May 2018, 16:07:47
-
investigating the cause of a misfire on the 2.5 v6 which only happens when the engine has reached operating temp (from cold drives smooth for a few miles).
after much swearing and skinned knuckles (1/4 drive deep e10 socket is essential) removed the coil pack to find this...
(https://s9.postimg.cc/bwezbg4j3/P1060072.jpg)
as you can see no.4 top right is full of green gunk so my question is will this have been caused by a poor connection of the plug lead/water ingress and if so can I clean this up and refit it or is it a faulty coil pack that needs replacing?
Cheers John.
-
What's the underside like ?
Ps, i've got a couple of known good coil packs here if needed ;)
-
a bit rusty and there seems to be a bit missing exposing some metal (middle left) so probably duff.
(https://s9.postimg.cc/7u6sebv1r/P1060073.jpg)
John :y
-
Yup if it ain't totally knackered yet it soon will be :(
What shape plug is on it ?
Square or oval ?
-
it's the early squared off type plug.
I've got a new replacement which has differently spaced mtg. holes but should do the job.
Thanks for the offer.
John :y
-
it's the early squared off type plug.
I've got a new replacement which has differently spaced mtg. holes but should do the job.
Thanks for the offer.
John :y
Both mine are oval anyway ;D
Hopefully your sorted now :)