Topic: installing new head unit.. (Read 1363 times)

infinity1 · « **on:** 27 February 2007, 16:15:53 »

right having taken the original philips head unit out (pre facelift with 6 disc changer)im left with 3 block connectors,my new jvc connects on the two bottom blocks,which leaves the 3rd dangling about,now presumably no3 connector controls the multi changer,and the speed sensitive volume??? i need to connect a new 12disc changer up to the new head unit so ipresumably need to thread the cable all through the car!! from the changer,unless i can somehow use the 'spare' block connector??
any ideas,or does anyone want to thread the cable for me?or give me an idea of were it can/will go..

Martin_1962 · « **Reply #1 on:** 27 February 2007, 16:54:28 »

The third block could go to a display driver if required

Feed the H/U changer cable under the cill trims , over the fuse box into the radio area

News:

Author Topic: installing new head unit.. (Read 1363 times)

infinity1

installing new head unit..

Martin_1962

Re: installing new head unit..