Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega Electrical and Audio Help / Red battery warning light and no instruments

« on: 27 October 2019, 13:26:07 »

While driving my 3.0 elite 2000 model the battery warning light came on and I lost all my instruments.I assumed it was an alternator failure and changed it,fault still apparent.With ignition switched on I have no lights on dash.I then start engine and have no instruments and the batt warning light on.Car drives normal and shows 14.5 volts at battery when running.Any help grateful . Thanks

2

Omega General Help / No chip or transponder

« on: 05 September 2013, 23:27:13 »

Hi, just bought a 2L Omega estate with no chip in key and transponder removed.Previous owner said he needed them and I thought I would be breaking car but its too good. The main problem with car is the cylinder head so I have got a replacement.Wil I need a new ecu,transponder and chip? Is the ecu now useless? Any help appreciated,thanks Ged.

3

Omega General Help / Prefacelift to facelift

« on: 24 November 2010, 19:58:19 »

Hi all, I have had a good look through the topics but cant find info on changing to facelift. I have a 1995 3l Elite saloon which is getting tatty around the edges but great mechanically. I have just got a facelift estate with a knackered head and was thinking of upgrading my old model with bonnet,wings bumper and doors and headlights. Im not sure about back doors as I havnt had the cars next to eachother. Any tips or info most grateful.Thanks Ged.

4

Omega General Help / Door removal

« on: 03 July 2009, 10:29:15 »

Hi,I have searched through topics but cant find anything on door removal.I need to replace the drivers front and rear on my 2.6 CDX due to damage.I found an article on door card removal and would like some top tips on door removal if poss, especially hinge pins.Thanks in advance,Ged..

5

Omega General Help / 95 3l elite inlet manifold

« on: 08 November 2008, 15:35:08 »

Hi Guys,just a quickie and cant find info in other forum.Will a 1998 2.5 omega inlet manifold be the same as my 95 3.0l elite?,someone is selling one on ebay including injectors and wiring for a good price.Thanks in advance,Ged..

6

Omega General Help / EML on all the time

« on: 19 October 2008, 14:35:32 »

Hi,just changed cam cover gaskets,spark plugs and leads on 3L V6 and have now got it running after a mix up with firing order(thanks for the help here,great site). I now have a permanent EML,never had one before work and have checked all connections.Could it be the misfires recorded during ht mix up?How do I get rid of light?Thanks in advance.

7

Omega General Help / HT LEAD POSITIONS

« on: 11 October 2008, 13:17:28 »

Hello,I have just replaced my cam cover gaskets on my 1995 3L Elite and replaced HT leads and spark plugs at the same time.Unfortunately have got the leads mixed up on the DIS,which is vertically positioned.I put the leads on 2-4-6 on top row and 1-3-5 on bottom starting from passenger side but its obviousely wrong when trying to start it.Any help welcomed please.Thanks,Ged..

8

Newbie Welcome Area / Hi,Im Ged  and new to the site

« on: 10 October 2008, 18:30:46 »

Hello,I live in the N.East and have a 1995 Elite and a 2003 2.6 CDX. Cheers..