Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Big_Al on 19 September 2006, 19:58:18
-
Hi guys , anyone help on this one. Heater won't get hot or even warm. I have no vacuum when i take the pipe off of the HBV with the engine running. No vac in any positon from hi down to low. Have blown through this pipe & can hear air passing from some where to the lower right of the glove box. Also done a smoke test & smoke is coming from that area as well. I presume that the other end of this pipe has come off from the vacuum supply. Does anyone know where it should go onto after it passes through the bulkhead & where abouts it is located . I'd like some help prior to trying to dismantle the dash board & electronic air control panel &messing it all up. Thanks guys, Big Al
-
Soz, don't know where it goes, but it will be to one of the solenoids there, and the solenoid is driven by ECC unit...
Unless someones knows better, its gonna be a glovebox out job I suspect, but may be worth just taking off the cardboard bit and the footwell distribution pipe to see it that gives enough access...