Topic: MV6 2.6 Auto breaking (Read 8826 times)

RobG · « **on:** 21 April 2014, 10:09:07 »

Due to no interest here and other usual places have reluctantly decided to break this

http://www.omegaowners.com/forum/index.php?topic=122994.0

Few prices:
Seats are prov. sold
Bootlip spoiler. £40 posted or bare bootlid with spoiler attached £40 collected.
Wheels & tyres £200 collected or courier at cost
Rear light units complete. £12ea posted

Will add more parts/prices later
Any more pics required, ask here or via PM.

RobG · « **Reply #1 on:** 21 April 2014, 14:20:24 »

Pics of wheels

ffcgary1 · « **Reply #2 on:** 21 April 2014, 18:22:50 »

Rob can i have the multi ram vac tank pls and passenger side rear lights pls (wing and boot )
Gary.

RobG · « **Reply #3 on:** 21 April 2014, 18:28:53 »

This one Gary

ffcgary1 · « **Reply #4 on:** 21 April 2014, 19:06:27 »

yep thats the kiddo

ffcgary1 · « **Reply #5 on:** 21 April 2014, 19:09:03 »

rob, you havent got a door mirror switch for a pfl have you by chance.

RobG · « **Reply #6 on:** 21 April 2014, 19:11:36 »

Quote from: ffcgary1 on 21 April 2014, 19:09:03

rob, you havent got a door mirror switch for a pfl have you by chance.

Sorry Gary, don`t do PFL`s

ffcgary1 · « **Reply #7 on:** 21 April 2014, 19:18:56 »

pfl are far superior you know rob.

amba · « **Reply #8 on:** 21 April 2014, 19:34:49 »

Whats the condition of the Electrical plug at the throttle body,please Rob ? as still looking for that and as much loom that can be cut off to the cam cover.

RobG · « **Reply #9 on:** 21 April 2014, 19:55:43 »

Quote from: ffcgary1 on 21 April 2014, 19:18:56

pfl are far superior you know rob.

Bollix

Monies received Gary, thank you.

Will get it all in the post hopefully tomorrow.

steve6367 · « **Reply #10 on:** 21 April 2014, 20:13:33 »

Are the 2 parts of the black skuttle cover in tact?

Possible to post, or a non-starter?

Steve

tigers_gonads · « **Reply #11 on:** 21 April 2014, 20:23:52 »

Quote from: ffcgary1 on 21 April 2014, 19:09:03

rob, you havent got a door mirror switch for a pfl have you by chance.

Still got my pfl breaker here Gary.
I'll dig one out tomorrow for you if you want ?

zirk · « **Reply #12 on:** 21 April 2014, 21:02:38 »

Quote from: ffcgary1 on 21 April 2014, 19:18:56

pfl are far superior you know rob.

May have one kicking around, but there not cheap you know, as there far superior over the common FL muck.

ffcgary1 · « **Reply #13 on:** 21 April 2014, 21:11:15 »

they must be VERY superior as everyone seems to want one, by the way they are so rare.

First to confirm gets the sale, thank you to you both for the offer.
Gary

hotel21 · « **Reply #14 on:** 23 April 2014, 14:13:54 »

Do you still have the two plastic hockey stick stylee coloured trims from under the headlights by any chance? If so, I'll have them thanks.

Also, know it's not on this car, but looking for centres for facelift elite rims. A couple of mine now AWOL! Thanks.

RobG · « **Reply #15 on:** 23 April 2014, 18:56:03 »

Quote from: hotel21 on 23 April 2014, 14:13:54

Do you still have the two plastic hockey stick stylee coloured trims from under the headlights by any chance? If so, I'll have them thanks.

Also, know it's not on this car, but looking for centres for facelift elite rims. A couple of mine now AWOL! Thanks.

PM sent Broocie

RobG · « **Reply #16 on:** 23 April 2014, 18:59:38 »

As per the linked to "sale" ad. Nav system has been tried with a later disc and all working perfectly

RobG · « **Reply #17 on:** 23 April 2014, 19:28:01 »

Quote from: amba on 21 April 2014, 19:34:49

Whats the condition of the Electrical plug at the throttle body,please Rob ? as still looking for that and as much loom that can be cut off to the cam cover.

Just waiting for a member to get back to me about the engine Andrew, unsure as to whether he needs the engine loom $:-\$

RobG · « **Reply #18 on:** 23 April 2014, 19:47:38 »

Quote from: steve6367 on 21 April 2014, 20:13:33

Are the 2 parts of the black skuttle cover in tact?

Possible to post, or a non-starter?

Steve

Both good Steve. Posting isn`t a problem

chrisgixer · « **Reply #19 on:** 23 April 2014, 20:50:52 »

Pm sent re suspension.

RobG · « **Reply #20 on:** 23 April 2014, 21:01:59 »

Quote from: chrisgixer on 23 April 2014, 20:50:52

Pm sent re suspension.

Replied

JamesV6CDX · « **Reply #21 on:** 23 April 2014, 22:06:21 »

Petrol filler flap?

RobG · « **Reply #22 on:** 24 April 2014, 14:57:14 »

Quote from: JamesV6CDX on 23 April 2014, 22:06:21

Petrol filler flap?

1st class postage is going to cost £3.20 James due to size restriction with Royal Mail (25mm max thickness for "large letter")

b4ndit · « **Reply #23 on:** 24 April 2014, 19:02:20 »

Rob,
have you a drivers side complete mirror please if so how much including postage to ch4 8ea
thanks
terry

RobG · « **Reply #24 on:** 24 April 2014, 21:04:52 »

Quote from: b4ndit on 24 April 2014, 19:02:20

Rob,
have you a drivers side complete mirror please if so how much including postage to ch4 8ea
thanks
terry

PM sent Terry

b4ndit · « **Reply #25 on:** 24 April 2014, 21:34:16 »

And replied thanks

humbucker · « **Reply #26 on:** 26 April 2014, 18:22:43 »

Hi Rob, what condition are the MV6 door cards in? I've just managed to put a tear in my offside rear and could do with a nearside front too, so I figured a replacement set might be in order. Cheers

RobG · « **Reply #27 on:** 26 April 2014, 18:34:10 »

Quote from: humbucker on 26 April 2014, 18:22:43

Hi Rob, what condition are the MV6 door cards in? I've just managed to put a tear in my offside rear and could do with a nearside front too, so I figured a replacement set might be in order. Cheers

Usual wear marks Dan but all four + the other "silver" bits (centre surround, ashtray, cointray) may be going in mine

humbucker · « **Reply #28 on:** 28 April 2014, 13:13:51 »

Quote from: RobG on 26 April 2014, 18:34:10

Quote from: humbucker on 26 April 2014, 18:22:43
Hi Rob, what condition are the MV6 door cards in? I've just managed to put a tear in my offside rear and could do with a nearside front too, so I figured a replacement set might be in order. Cheers
Usual wear marks Dan but all four + the other "silver" bits (centre surround, ashtray, cointray) may be going in mine

Ok Rob, thanks for the heads up. Incidentally, the silver bits are fine on mine - it's the fabric that's torn. Are the facelift MV6 and Elite doorcards the same (other than the wood/alu insert?). Might be easier for me to get Elite door cards and swap the trim.

MaxV6 · « **Reply #29 on:** 30 April 2014, 12:28:43 »

light switch assembly ?? specifically front fog light switch is the urgent thing….. mine has suddenly decided to fail and is stuck on……

deviator · « **Reply #30 on:** 30 April 2014, 15:49:48 »

Hi Rob,

Which alternator is it? If it's a good condition 140amp one, please let me know the price!

Dave

RobG · « **Reply #31 on:** 30 April 2014, 16:31:05 »

Quote from: MaxV6 on 30 April 2014, 12:28:43

light switch assembly ?? specifically front fog light switch is the urgent thing….. mine has suddenly decided to fail and is stuck on……

PM sent Max

RobG · « **Reply #32 on:** 30 April 2014, 19:49:32 »

All SOLD
Wheels
Seats
Bootlid/spoiler
N/S rear door
Scuttle
O/S door mirror
1 front C/L motor/solenoid

deviator · « **Reply #33 on:** 01 May 2014, 07:26:25 »

Quote from: deviator on 30 April 2014, 15:49:48

Hi Rob,

Which alternator is it? If it's a good condition 140amp one, please let me know the price!

Dave

P6UL K · « **Reply #34 on:** 01 May 2014, 10:31:35 »

Got any rear tie bars laying around Rob?

RobG · « **Reply #35 on:** 01 May 2014, 10:40:21 »

Quote from: P6UL K on 01 May 2014, 10:31:35

Got any rear tie bars laying around Rob?

Still on the breaker at the minute Paul. Should be off the weekend mate

P6UL K · « **Reply #36 on:** 01 May 2014, 11:05:27 »

Lovely job mate, let me know when their off and how much you want and I'll pop it across

serek · « **Reply #37 on:** 03 May 2014, 18:23:30 »

by any chance you have mirror with rain sensor?

RobG · « **Reply #38 on:** 03 May 2014, 19:23:55 »

Quote from: serek on 03 May 2014, 18:23:30

by any chance you have mirror with rain sensor?

Nope, sorry Sew

RobG · « **Reply #39 on:** 03 May 2014, 20:58:59 »

Front N/S wing & front Prodrive bumper reserved

RobG · « **Reply #40 on:** 09 May 2014, 17:00:56 »

This will be gone Monday evening (12th) so any odd bits required, shout now

P6UL K · « **Reply #41 on:** 09 May 2014, 17:36:31 »

Rear tie bars mate?

RobG · « **Reply #42 on:** 09 May 2014, 18:33:49 »

Quote from: P6UL K on 09 May 2014, 17:36:31

Rear tie bars mate?

Will be getting `em off this weekend Paul. Weather`s been a bit shite

P6UL K · « **Reply #43 on:** 09 May 2014, 18:55:55 »

Noooo problemoooo!

RobG · « **Reply #44 on:** 10 May 2014, 20:54:27 »

Quote from: RobG on 09 May 2014, 17:00:56

This will be gone Monday evening (12th) so any odd bits required, shout now

Change of plan, going sometime tomorrow (11th)

brian36 · « **Reply #45 on:** 11 May 2014, 11:59:40 »

hi rob got the crash bar which is still packaged at moment but thanks,
anyway do you have the water bottle screen that fits in to it? i think mine damaged thanks

RobG · « **Reply #46 on:** 11 May 2014, 12:27:46 »

Just the reservoir on it`s own Brian?

brian36 · « **Reply #47 on:** 11 May 2014, 12:57:34 »

hi rob can you pm me price with postage thanks

steve6367 · « **Reply #48 on:** 11 May 2014, 14:05:01 »

Did this have a tow bar on it Rob? (if its not already gone)

RobG · « **Reply #49 on:** 11 May 2014, 14:06:42 »

Quote from: brian36 on 11 May 2014, 12:57:34

hi rob can you pm me price with postage thanks

Is it just the bare reservoir Brian $:-\$ No hosing, pumps or level sensor $:-\$

RobG · « **Reply #50 on:** 11 May 2014, 14:08:20 »

Quote from: steve6367 on 11 May 2014, 14:05:01

Did this have a tow bar on it Rob? (if its not already gone)

It did Steve, too late now though, car is so low to the ground would need a forklift to raise it high enough to remove it

steve6367 · « **Reply #51 on:** 11 May 2014, 14:14:15 »

No worries, thank you for the reply.

Steve

RobG · « **Reply #52 on:** 11 May 2014, 14:17:28 »

Quote from: steve6367 on 11 May 2014, 14:14:15

No worries, thank you for the reply.

Steve

If only you would have asked Friday when the suspension was still on it

P6UL K · « **Reply #53 on:** 11 May 2014, 16:19:56 »

Don't suppose you have any headlamp washer motors? It's the part that bolts to the base of the headlamps.

brian36 · « **Reply #54 on:** 11 May 2014, 16:48:19 »

Quote from: RobG on 11 May 2014, 14:06:42

Quote from: brian36 on 11 May 2014, 12:57:34
hi rob can you pm me price with postage thanks
Is it just the bare reservoir Brian $:-\$ No hosing, pumps or level sensor $:-\$

got those parts so just the bottle pm the cost thanks

RobG · « **Reply #55 on:** 11 May 2014, 16:53:23 »

Quote from: P6UL K on 11 May 2014, 16:19:56

Don't suppose you have any headlamp washer motors? It's the part that bolts to the base of the headlamps.

Not sure what you mean Paul

H/L washer pump is fitted in main reservoir and hosing runs from it to the washers. No washer motor that I know of "bolts to the base of the headlamps".

P6UL K · « **Reply #56 on:** 11 May 2014, 17:14:53 »

On the PFL the arm comes out from under the headlamp and sprays the glass then returns to it's original position, it's that arm section that the water hose connects to that I need mate

RobG · « **Reply #57 on:** 11 May 2014, 17:45:28 »

Quote from: P6UL K on 11 May 2014, 17:14:53

On the PFL the arm comes out from under the headlamp and sprays the glass then returns to it's original position, it's that arm section that the water hose connects to that I need mate

Nothing here Paul, sorry. All the parts I`ve got are from facelifts

chrisgixer · « **Reply #58 on:** 11 May 2014, 19:43:15 »

Quote from: P6UL K on 11 May 2014, 17:14:53

On the PFL the arm comes out from under the headlamp and sprays the glass then returns to it's original position, it's that arm section that the water hose connects to that I need mate

Face lifts, the head light washers are fixed, in situ, to the bumper, with a clip from the back. Bumper off job to remove.

RobG · « **Reply #59 on:** 13 May 2014, 17:17:13 »

Car is now gone. Can admin please lock, thanks

steve6367 · « **Reply #60 on:** 13 May 2014, 20:54:19 »

Out of interest Rob how much is a gutted shell of an Omega worth in scrap?

News:

Author Topic: MV6 2.6 Auto breaking (Read 8826 times)

chrisgixer

chrisgixer