Omega Owners Forum

Newbie Area => Newbie Welcome Area => Topic started by: Peeko84 on 15 June 2017, 12:12:19

Title: Hi from Glasgow
Post by: Peeko84 on 15 June 2017, 12:12:19

Afternoon all, just joined the forum. I am in the process of converting an astra g to a V6. However as will all builds i will need advice and alot of parts lol. On that note does anyone have a breather bridge assembly for sale.

Title: Re: Hi from Glasgow
Post by: Varche on 15 June 2017, 13:50:11

Hola! Welcome to the forum :y

Sounds an interesting project. Rear wheel drive? Be nice to see photos as you go along

You need 250 posts to be able to advertise items for sale and wanted. Not many read this section. It might be possible to put a Breather wanted  ad in the test section and for an Admin to move it.

Title: Re: Hi from Glasgow
Post by: Lizzie Zoom on 15 June 2017, 17:58:40

Hello and a warm welcome to you :y

There is plenty of sound advice available on here from people who know what they are talking about.  When you need help, post them under the suitable "Help" sections :y :y

Title: Re: Hi from Glasgow
Post by: BazaJT on 15 June 2017, 19:38:47

Hello and welcome to OOF :y What capacity V6 are you putting in?

Title: Re: Hi from Glasgow
Post by: flyer 0712 on 15 June 2017, 22:32:28

Hi and welcome  :y

Title: Re: Hi from Glasgow
Post by: Peeko84 on 17 June 2017, 13:38:48

Thanks everyone for the warm welcome! The V6 will hopfully be a 3.1 (X30XE block with a Z32SE crank) being an engineer by trade im going to be trying out a few wierd and wonderfull ideas possible incorprate a few ideas from the calibra DTM. Initally it will stay FWD but i will be toying with the final drive ratio.

Title: Re: Hi from Glasgow
Post by: migiestate on 19 June 2017, 21:14:05

Hello and welcome to the forum. :y