Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[New POD]

New pins and spring clips arrived.

And they actually fit.

One tip before assembly is to squeeze the split spring at the end of the pin with a pair of pliers because they will never go in otherwise.

Also learnt that I need to assemble without the spring clips, push the pistons right back and check the pads are free to actually move.  The fettling I had done last week was just not quite enough and didn't move freely so the slots on the pads needed just a little extra removing.

I also took the opportunity to change the oil and filter.   

[cam.in.head]

Thats very good news. I think many on here will be bying some of them then. From autovaux you say. Do you have a part number to search for. Cheers.

[New POD]

Thats very good news. I think many on here will be bying some of them then. From autovaux you say. Do you have a part number to search for. Cheers.

http://www.omegaowners.com/forum/index.php?topic=127928.msg1821673#new 

[cam.in.head]

do you have a part number for the autovaux items. when you search on their site it always comes up as no parts listed

[Doctor Gollum]

do you have a part number for the autovaux items. when you search on their site it always comes up as no parts listed

You're searching wrong

Look for split pins of around 100mm in length and circa 6mm diameter

[New POD]

do you have a part number for the autovaux items. when you search on their site it always comes up as no parts listed

I actually got them from a sister company to autovaux


0044 (0)1924 635111
www.genuinepartsearch.co.uk
janet@hscomponents.co.uk
sales@genuinepartsearch.co.uk