Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[JamesV6CDX]

What's the current recommendation?

I know there have been a few successes with pattern ones, I'm just not sure which

Thanks!

[JamesV6CDX]

Also, the breather seals and o rings - where to buy? dealer says no!

[BazaJT]

Don't know about what gaskets are being used.Last year I bought a pack of seals from Vx stealers that are described as o rings,it consists of four round ones and one that looks slightly deformed as it looks like a not quite formed figure 8.The part number for the pack is 90500983.I believe the one that's hard to source[if it's possible at all]is the one that sits beneath the breather bridge.

[BazaJT]

Wasn't Webby running something like Payen gaskets?

[Nick W]

Elring on mine for the last 3 and a half years. They were part of a £12 head set, that I used all of. I didn't have new O rings, so gave them a smear of silicone.

[Bojan]

I've used Victor Reinz on mine, installed 2.5 years ago, and all good for now. Previous set was the same manufacturer, almost no leaks for over 4 years.

Not sure how common this manufacturer is in UK. I'd go for erling if VR wasn't available.

[gbh]

Used Victor Reinz on mine too,so far so good

[Keith ABS]

  Which "O" rings do you require? I have sets of the inlet manifold rings, £8 a set posted

Keith ABS

[terry paget]

I am in need of cam cover gaskets. I bought a set from Leader Specialist Components, Redhill Surrey, presuming they would be the same as supplied previously, and depicted in their e-bay advert. they sent instead Hans Pries TOPRAN gaskets, labelled ERSETZT - replacing. They seemed all right, fitted OK, but on first fitting one of the 1-3-5 gaskets became displaced and got cut in 2, I fitted a second one, it seemed OK, but now that side is smoking, suggesting an oil leak.

Where do I get Payen or Elring cam cover gaskets?

[robson]

I can probably get Elring I will check and let you know

[serek]

Reintz gaskets come with O rings