Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Martin_1962 on 05 December 2007, 12:52:44
-
OK
Anyone with EPG
Need part numbers for both centre pipes and the silencer
Is there a number for the 2 outlet pipe silencer?
Also what clamps and bolts are required
Thanks
-
Please?? :-?
-
This was the list for my 1998 2.5 Minifacelift:
v0093181162 RH Centre Silencer £95.26
v0093181157 LH Centre Silencer £92.76
V0024434133 Exhaust Screw (Actually bolts for the centre sections to cat flange)
V0009157100 Rear Silencer £107.00
v0090466668 Exhaust mounting £4.38 (rubber mounts)
These part numbers are taken from my receipt - I do not have EPG. Prices are on TC and ex VAT.
I hope that this helps
-
Hit the EPG button, and just got the Electronic Programme Guide (tv listings)
Nothing about exhausts on there :-/
Unless of course you meant EPC ;D
-
Hit the EPG button, and just got the Electronic Programme Guide (tv listings)
Nothing about exhausts on there :-/
Unless of course you meant EPC ;D
;D ;D ;D ;D
-
:(
Thanks :y
-
This was the list for my 1998 2.5 Minifacelift:
v0093181162 RH Centre Silencer £95.26
v0093181157 LH Centre Silencer £92.76
V0024434133 Exhaust Screw (Actually bolts for the centre sections to cat flange)
V0009157100 Rear Silencer £107.00
v0090466668 Exhaust mounting £4.38 (rubber mounts)
These part numbers are taken from my receipt - I do not have EPG. Prices are on TC and ex VAT.
I hope that this helps
They are not trade club prices, the two centre sections are only trade and the back box you have been charged full retail for!
It should have been 89.66 cheaper (not inc vat!).....i.e. best part of a ton!
The rubber mounts are generaly ok but, the bolts are a must
-
2.6 saloon from 00
LH centre 93181157£69.18
RH centre 93181162 £71.22
rear box 9157100 £64.96
not sure if the 2.6 back box is sinle or twin outlet. Might be worth getting the 3.0 one. Should fit OK.
9157101 £94.29.
All prices are Trade Club and plus VAT required.....
rear box normally has the clamps fitted/welded already to join to centres, and centres may/may not need new bolts to connect to cats, depending on how good you are at removal. A drill and stainless bolts work well, otherwise....
-
Thanks Bruce
2.6 is single
Might call Bicknells - less than expected anyway.
Tempted by the dual outlet - looks better
-
Thanks Bruce
2.6 is single
Might call Bicknells - less than expected anyway.
Tempted by the dual outlet - looks better
It doesn't look 30+vat better though....
-
OK
Anyone with EPG
Need part numbers for both centre pipes and the silencer
Is there a number for the 2 outlet pipe silencer?
Also what clamps and bolts are required
Thanks
Thought you'd got an ABS TC card? Hence access to price lists ;)
-
Does the ABS card allow you to logon to the trade club site - I didn't think it did?
Or is there a price list on the ABS site..
-
Does the ABS card allow you to logon to the trade club site - I didn't think it did?
Or is there a price list on the ABS site..
Do you have an ABS card?
-
OK
Anyone with EPG
Need part numbers for both centre pipes and the silencer
Is there a number for the 2 outlet pipe silencer?
Also what clamps and bolts are required
Thanks
Thought you'd got an ABS TC card? Hence access to price lists ;)
Not on line though only in the place
-
OK
Anyone with EPG
Need part numbers for both centre pipes and the silencer
Is there a number for the 2 outlet pipe silencer?
Also what clamps and bolts are required
Thanks
Thought you'd got an ABS TC card? Hence access to price lists ;)
Not on line though only in the place
PM me your TC number (its printed on the card) and membership number (hand written)..
-
Thanks Bruce
2.6 is single
Might call Bicknells - less than expected anyway.
Tempted by the dual outlet - looks better
;D
Info would have been there at 13.08 hrs today if you had used the magic 'p' word when prompted........ ;D ;)
-
Thanks Bruce
2.6 is single
Might call Bicknells - less than expected anyway.
Tempted by the dual outlet - looks better
;D
Info would have been there at 13.08 hrs today if you had used the magic 'p' word when prompted........ ;D ;)
I used a preemptive thank you ;)
-
PM sent