Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Field Marshal Dr. Opti]

They make the car sit low at the front and I've scraped them both.

Each side is attached with 4 torx self tappers......Jaguar use 2 different sizes for some reason.

Anyway, I've removed the screws but for some reason the splitters which weigh SFA have additional support.  They are attached to the bumper with some form of stringy contact adhesive. Quite why I have no idea.

Best way to separate the splitters from the bumpers so I can respray them?......any idea chaps?

[STEMO]

Crowbar? 

[biggriffin]

Get one of the cooks sharp knifes and insert it, between bumper and splitter and slide along.

[Field Marshal Dr. Opti]

Get one of the cooks sharp knifes and insert it, between bumper and splitter and slide along.

Hmmm. This may be doable BG......although the gap is very tight.

[Nick W]

Get one of the cooks sharp knifes and insert it, between bumper and splitter and slide along.

You might want to consider a Stanley knife if you intend to benefit from the cook's efforts

[Field Marshal Dr. Opti]

Just found torx self tapper number 5......hidden in an 'awkward to get at three inch recess' right at the end of the splitter.

I have them both off now. Gently slicing away the stringy adhesive as I went.

A quick 'smooth down' with wet and dry followed by a respray and they'll be as good as new.

[Viral_Jim]

Anyway, I've removed the screws but for some reason the splitters which weigh SFA have additional support.  They are attached to the bumper with some form of stringy contact adhesive. Quite why I have no idea.

So that when the work-shy Brummie Who's supposed to fit it does a half-arsed job, it doesn't rattle 

[Field Marshal Dr. Opti]

It seems I do need some form of stringy contact adhesive along the front edge of the splitters. The fixing screws are located quite a long way back and it is easy for a gap between front edge of the splitter to develop as speed rises.

Which adhesive to use?.....

[STEMO]

I would research this carefully, Opti, you really don't want to get adhesive over your paintwork.

[Field Marshal Dr. Opti]

I would research this carefully, Opti, you really don't want to get adhesive over your paintwork.

That is why I am asking 'experts' such as yourself.

[Migv6 le Frog Fan]

Tiger seal.  .............as long as you don't intend removing it again. 

[STEMO]

Tiger seal.  .............as long as you don't intend removing it again. 

I was thinking something that doesn't go completely off, yet provides good adhesion. You know, a bit like the stuff that was on it. 

[Field Marshal Dr. Opti]

The jaguar forum suggest Evostick.

It's stringy as f*uck but you can get it off again.

[Field Marshal Dr. Opti]

Tiger seal.  .............as long as you don't intend removing it again. 

I expect it will need to come off again.

Isn't a Tiger seal a large lump of blubber that lies on the beach all day?

[Auto Addict]

Tiger seal.  .............as long as you don't intend removing it again. 

I expect it will need to come off again.

Isn't a Tiger seal a large lump of blubber that lies on the beach all day?

I don't think you should write about TB like that

[Field Marshal Dr. Opti]

Tiger seal.  .............as long as you don't intend removing it again. 

I expect it will need to come off again.

Isn't a Tiger seal a large lump of blubber that lies on the beach all day?

I don't think you should write about TB like that

An hour in the sack with the girl of his dreams (Shami. C) would remedy that.

300 calories a time. Six times a day.

[STEMO]

The jaguar forum suggest Evostick.

It's stringy as f*uck but you can get it off again.

Yep, that would fit the bill.

[Kevin Wood]

An hour in the sack with the girl of his dreams (Shami. C) would remedy that.

300 calories a time. Six times a day.

It'd be 350 calories. She'd have to catch him first.

[Doctor Gollum]

Black Sikaflex

Good for 150 mph and can be removed with heat and white spirit...

[STEMO]

Black Sikaflex

Good for 150 mph and can be removed with heat and white spirit...

Don't think I'd want to put heat anywhere near the front end of my jag. 

[Migv6 le Frog Fan]

It doesn't need heat (Nor does Tiger seal). It needs a thin / sharp implement, like a wallpaper scraper tapping along the join to cut through it.
An omega boot spoiler takes about 15 minutes to remove by this method. 

[Field Marshal Dr. Opti]

Tiger Seal has been mentioned on the Jaguar forum also. ....along with Sikaflex. They say it will be a bastard to remove the trim again once this stuff has 'welded' the splitter to the bumper.

Some suggest 3M VBH double sided tape.

[TheBoy]

Number plate tape?

[STEMO]

Evostick still sounds best to me. And you can get off your head while doing it.

[Field Marshal Dr. Opti]

Evostick still sounds best to me. And you can get off your head while doing it.

Back in the good old days we used butane lighter fuel.

[Sir Tigger KC]

Gripfill is good, flexible and cheap. 

You can get off your head on that too! 

[aaronjb]

Some suggest 3M VBH double sided tape.

I can certainly tell you that 3M trim tape sticks like sh*t to a blanket.

Not that I'd know about the latter.

[Viral_Jim]

Gripfill is good, flexible and cheap. 

Not so easy to remove again though? Most things in our house have gripfill in their makeup somewhere down the line. It’s particularly good for attaching skirting board 

Opti, just to throw another idea in, double sided glazing tape, it’s a bit like those sticky numberplate pads but comes on a roll. Also cheap and sticks like, um, well as above.

Comes off without too much of a fight too. You can cut it in half with a knife then peel each side off separately.

[TheBoy]

it’s a bit like those sticky numberplate pads but comes on a roll.

I've only ever known the numberplate stuff to come on a roll, never knew it was available as pads.

[biggriffin]

Some suggest 3M VBH double sided tape.

I can certainly tell you that 3M trim tape sticks like sh*t to a blanket.

A certain Scouser might be able to answer that.

[STEMO]

Some suggest 3M VBH double sided tape.

I can certainly tell you that 3M trim tape sticks like sh*t to a blanket.

A certain Scouser might be able to answer that.

A whole sentence without a spelling mistake, and minus the usual sixteen commas? Where's biggriffin? What have you done with him? 

[Auto Addict]

it’s a bit like those sticky numberplate pads but comes on a roll.

I've only ever known the numberplate stuff to come on a roll, never knew it was available as pads.

I've only seen it in pads, never in a roll

[TheBoy]

it’s a bit like those sticky numberplate pads but comes on a roll.

I've only ever known the numberplate stuff to come on a roll, never knew it was available as pads.

I've only seen it in pads, never in a roll

This is how I've seen (and bought) before...

http://www.halfords.com/motoring/paints-body-repair/adhesives/harris-number-plate-tape-12mmx4m

[Auto Addict]

it’s a bit like those sticky numberplate pads but comes on a roll.

I've only ever known the numberplate stuff to come on a roll, never knew it was available as pads.

I've only seen it in pads, never in a roll

This is how I've seen (and bought) before...

http://www.halfords.com/motoring/paints-body-repair/adhesives/harris-number-plate-tape-12mmx4m

Well, you learn something every day

[Viral_Jim]

TBH it’s probably the same stuff in a different packet  . This is the glazing tape:

https://www.reddiseals.com/product/security-glazing-tape/?creative=42143607169&matchtype=&keyword=&gclid=Cj0KCQjwgMnYBRDRARIsANC2dflbL4-7ZTT4gqnRCFL_MGdXfbmEXcAUE8ePAq4oSQCmjRTKcbQrsVAaAlV9EALw_wcB

[Nick W]

TBH it’s probably the same stuff in a different packet  . This is the glazing tape:

https://www.reddiseals.com/product/security-glazing-tape/?creative=42143607169&matchtype=&keyword=&gclid=Cj0KCQjwgMnYBRDRARIsANC2dflbL4-7ZTT4gqnRCFL_MGdXfbmEXcAUE8ePAq4oSQCmjRTKcbQrsVAaAlV9EALw_wcB

Probably, but all of the trimtape I've seen is the same thickness; the glazing tape is available in a range of them.