Just had the battery disconnected for the past hour and when reconnected it made no difference.
Phone will pair with device as normal.Have un paired and re paired all is good there.
When call made NCDC doesn't mute down nor does any image of Phone appear on the CID.
When you request Parrott to give spoken volume or ring tone no sound is produced from speakers,but you can hear phone connecting to number dialed so fault isnt with phone.
Have tried 2 different phones and both will pair with Parrott as shown on screen display, but result above is the same from the NCDC.
I will have a close look at the Blue Box on the Parrott at somepoint possibly tomorrow just to check nothing has been pulled out although cant see how this could of happened as nothing other than Head unit and Screens were touched yesterday.
This back board...excuse my ignorance but is that located inside the Top part of the NCDC unit which runs the navigation.The board needs removing and the board from the other NCDC fitting in its place ?
Is this within my ability and is there anything I could opps up