Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: HOW TO: Remove / replace the centre console trim  (Read 10178 times)

0 Members and 1 Guest are viewing this topic.

Albatross

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Bedford
  • Posts: 2100
  • An LSD & an S2000!
    • View Profile
HOW TO: Remove / replace the centre console trim
« on: 04 June 2008, 08:02:47 »

Step 1

Lift out the rubber cup holder and the handbrake gaiter






Step 2

Slide both front seats right forward and undo these bolts



Step 3

In the place where the rubber cup holder was undo these 2 bolts



Step 4

Lift out (up and backwards) the central arm rest



Step 5

Undo these screws and then lift out the rubberised slotted cover that usually clamps the handbrake gaiter



Step 6

Now you have removed the rubberised handbrake gaiter clampy bit you'll see 2 more bolts; undo these



Step 7

Gently prise the gearshift gaiter out and then prise up the plastic surround that contains the gear indicator lights. You will not have to disconnect the wires as the console trim will eventually lift over all of this.

Then undo the screws as indicated in the picture below and then slide the, now free, trim forward slightly.



Step 8

The wooden trim now having been moved forward should expose these 2 bolts; undo them



Once you have all of this undone you will find that you can (with some force) manage to start to move the whole central console back in the car by about an inch. Once you have done this you should find you can lift the trim out.

Replacement is the reverse.

Hope that helps ;y
« Last Edit: 29 March 2009, 22:02:15 by TheBoy »
Logged
Pages: [1]   Go Up
 

Page created in 0.03 seconds with 18 queries.