Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[feeutfo]

Just got my bushes off of ebay,im in a bit of a quandry at the moment in that do i source another pair of good second hand wishbones to change the bushes or buy a cheap set off of ebay ( not sure if the rear bushes go on the cheap ones like the fronts!! ),mine are actually ok at the moment ( genuine vauxhall fitted by previous owner ) or do i just replace them on my own wishbones  :-/

Yep, if the rearward bush is fine, fit Polly to your existing, no need to remove the wishbone even.

[mahony]

Just got my bushes off of ebay,im in a bit of a quandry at the moment in that do i source another pair of good second hand wishbones to change the bushes or buy a cheap set off of ebay ( not sure if the rear bushes go on the cheap ones like the fronts!! ),mine are actually ok at the moment ( genuine vauxhall fitted by previous owner ) or do i just replace them on my own wishbones  :-/

Yep, if the rearward bush is fine, fit Polly to your existing, no need to remove the wishbone even.

Thanks, i think that's what i will do,just got to get a burner to burn the old rubbers out ,or maybe i could use a drill ?

[feeutfo]

Just got my bushes off of ebay,im in a bit of a quandry at the moment in that do i source another pair of good second hand wishbones to change the bushes or buy a cheap set off of ebay ( not sure if the rear bushes go on the cheap ones like the fronts!! ),mine are actually ok at the moment ( genuine vauxhall fitted by previous owner ) or do i just replace them on my own wishbones  :-/

Yep, if the rearward bush is fine, fit Polly to your existing, no need to remove the wishbone even.

Thanks, i think that's what i will do,just got to get a burner to burn the old rubbers out ,or maybe i could use a drill ?

Yep, hole cutter, hammer and wood chisel, drill, burner, what ever you have. All that's important at that stage is making room for a hack saw to cut through the bush outer, but not the wishbone metal itself obviosly.

See Turks video.

[mahony]

Ta,just watched it,very helpful 

[Chang]

I presume this is not going any further so I have removed myself from the list and will get them from the ebay seller.

1 Dave Elite
2 Elite Pete
3 aaronjb + ARBs
4 AngelGrinder
5 chrisgixer
6 MF........................if the price is right
7 Davethediver
8 Big_Roger
9 VXL V6
10 Gooseman
11 mr ICE man
12 mrjimbo (would also want roll bar bushes if poss)
13 Unlucky Mark Mv6
14 Cliffo b (would also want anti roll bar bushes if poss)
15 Elitenut (would also want anti roll bar bushes if poss)
16 tango
17 humbucker (would also want anti roll bar bushes if poss, also dependent on cost)
18 Broomies Mate
19 Omegatoy (dependant on the discount cos they have to be posted to spain)
20 Arrolman
21 nitro +arb
22 mr stud...if price ok
23 Shyboy
24 djac (inc ARB)
25 BigEgg + ARB
26 Marks DTM Calib
27 Andy H (oops - missed one)
28 Delroy47
29 Biggriffin {arb as well} price yet
30 jordan681.. (if price is right) arb's too..!!!
31 woodsy_mv6 +ARB
32 taxi al +arb
33 Auto Addict
34 Kevin Wood - argh, go on then.
35 Dan_282
36 Vamps + ARB
37 Zuffenhausen + ARB
38 Venom + ARB

[mrgreen]

gotta say maybe powerflex have a hard on after the recent activity form the site but i wouldn't hold my breath for this "development " to go much further

[PxMetro]

So has anyone actually successfully fitted a set of these bushes yet, and what is the final result? Has it stopped the inherant "Tramlining" and general wandering about all over the road . I have sensed great exitement over the bushes, so just wondering if they have lived up to expectations

[feeutfo]

I really don't think the tram lining will disappear completely, ESP as the tyres wear.  :-?