Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[05omegav6]

In the guide, it suggests the old cartridge case is held in with a hollow bolt requiring EITHER a 27mm socket OR a 12mm hex bit.

Is it one or tother depending on year/engine etc, or can both be used to remove any housing?

Mine has a 12mm hex hole in the centre, (which I don't have...yet), but couldn't see whether the outside of the hollow bolt was hex shaped or round

[05omegav6]

To answer my own question...

Late 3.2s require a 12mm hex to undo the retaining bolt