Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[davieboy0312]

i have just replaced the screen on the mig for a heat reflective sensor screen. got the sensor and the mirror. behind the head cloth i have 3 plugs. but none of them fit the sensor or fit the auto mirror. am i missing something?

[05omegav6]

Different plugs early to late...either obtain the mirror/sensor to match your car loom or the tails to match the mirror and sensor you have

[davieboy0312]

the loom came from a 2000 facelift and the sensor came from a 2002 vectra if that help 

would a pic of the plugs help?

[05omegav6]

What model is your car?

[davieboy0312]

was a 2000 mv6. ex government car

[05omegav6]

was a 2000 mv6. ex government car

Pre or post facelift? That said, being ex job, all bets are off without seeing it...

[davieboy0312]

definitely a facelift. would the reg help?

[davieboy0312]

im a backside i have bought one of these

http://www.ebay.co.uk/itm/Vectra-C-Signum-Astra-H-Windscreen-wiper-automatic-rain-sensor-GM-13107803-6616-/201146397380?hash=item2ed54272c4

should i not have bought one of these instead?
http://www.ebay.co.uk/itm/Opel-Astra-H-Zafira-B-Regensensor-Sensor-Frontscheibe-13107803-EX-/151764845779?hash=item2355e3c4d3

looks like one small plug i have behind the headcloth

probs is the mirror now, it has a long thin plug the only one left behind is a 3 pin by 2 pin square plug

[05omegav6]

Would need to physically see the plugs to identify them... But absolutely no guarantees of what wiring is left in the roof

[davieboy0312]

i shall go take a few pics mate

[davieboy0312]

think this is the sensor wire

https://www.dropbox.com/sc/03925f3iqft6btp/AACebp4Thb0vR24JGOl15KCSa

https://www.dropbox.com/sc/93tc5bfm2kxfbku/AABV9GYa1Jsc3sf3kGVaJqTNa

and this is the mirror plug

https://www.dropbox.com/sc/vlv03w58idq7pnz/AADAWUOP-u__auqm9B2SJzmMa

https://www.dropbox.com/sc/aqy60o66jvzo1p7/AAC8GNcGsyfL3GcYPb0UXGTPa

[05omegav6]

That's sunroof and microphone plugs...

Keep digging, you're missing at least 2 plugs if not 3...

Might be behind the big foam block...

[davieboy0312]

thats every single plug that was there al. do i have a odd ball??

[05omegav6]

Plod could have used the wiring for all sorts, and simply chopped it out at the passenger kick panel

All mime have still had all the plugs present, but the wiring wasn't always intact

Follow my guide for dropping the headlining and see what's up there

[davieboy0312]

had the shell come back on monday from painter. refitted the loom today and ran up the passenger pillar to the head cloth. that was all the plugs there are. is it like the rear blind loom and might be a joining piece for the sensor? i hope

where is your guide?