Omega Owners Forum

Chat Area => General Car Chat => Topic started by: danzigfan on 27 April 2018, 17:23:38

Title: Another cup holder solution
Post by: danzigfan on 27 April 2018, 17:23:38
I obviously had too much time on my hands so I did this  ;)

https://s20.postimg.cc/57xebcyrh/IMAG1433.jpg

https://s20.postimg.cc/a6kwpwaa5/IMAG1436.jpg

https://s20.postimg.cc/64umswvjx/IMAG1439.jpg

https://s20.postimg.cc/4ielz48jh/IMAG1435.jpg

https://s20.postimg.cc/820jovt8t/IMAG1434.jpg

Can't find a way to paste pics directly, I'm really sorry.
I found this item on ebay for 10€, ordered 2 din mounting frame, painted it black and made a frame around radio and cup holder from plywood leftovers which had to be cut, sanded, primered and spray coloured black.
As you can see cup holder is a bit to near to shift knob but isn't touching it
Title: Re: Another cup holder solution
Post by: b4ndit on 27 April 2018, 18:01:32
nice :y :y
Title: Re: Another cup holder solution
Post by: Shackeng on 27 April 2018, 18:33:15
I obviously had too much time on my hands so I did this  ;)

https://s20.postimg.cc/57xebcyrh/IMAG1433.jpg

https://s20.postimg.cc/a6kwpwaa5/IMAG1436.jpg

https://s20.postimg.cc/64umswvjx/IMAG1439.jpg

https://s20.postimg.cc/4ielz48jh/IMAG1435.jpg

https://s20.postimg.cc/820jovt8t/IMAG1434.jpg

Can't find a way to paste pics directly
, I'm really sorry.
I found this item on ebay for 10€, ordered 2 din mounting frame, painted it black and made a frame around radio and cup holder from plywood leftovers which had to be cut, sanded, primered and spray coloured black.
As you can see cup holder is a bit to near to shift knob but isn't touching it

http://www.omegaowners.com/forum/index.php?topic=137219.0
Title: Re: Another cup holder solution
Post by: Sir Tigger KC on 27 April 2018, 18:37:34
Proper job!  :y
Title: Re: Another cup holder solution
Post by: Mister Rog on 27 April 2018, 19:00:05


https://s20.postimg.cc/4ielz48jh/IMAG1435.jpg



Alice In Chains   Nice one !   :y




Title: Re: Another cup holder solution
Post by: STEMO on 27 April 2018, 19:20:29
Don't open the tray when there's cups in the holder  ;D
Title: Re: Another cup holder solution
Post by: danzigfan on 27 April 2018, 19:26:18
I obviously had too much time on my hands so I did this  ;)

https://s20.postimg.cc/57xebcyrh/IMAG1433.jpg

https://s20.postimg.cc/a6kwpwaa5/IMAG1436.jpg

https://s20.postimg.cc/64umswvjx/IMAG1439.jpg

https://s20.postimg.cc/4ielz48jh/IMAG1435.jpg

https://s20.postimg.cc/820jovt8t/IMAG1434.jpg

Can't find a way to paste pics directly
, I'm really sorry.
I found this item on ebay for 10€, ordered 2 din mounting frame, painted it black and made a frame around radio and cup holder from plywood leftovers which had to be cut, sanded, primered and spray coloured black.
As you can see cup holder is a bit to near to shift knob but isn't touching it

http://www.omegaowners.com/forum/index.php?topic=137219.0

I know... But it's very hard to find a "ctrl" on keyboard when I'm using a phone :P
Title: Re: Another cup holder solution
Post by: pauls on 27 April 2018, 19:42:14
Nice fit :y
Title: Re: Another cup holder solution
Post by: Rods2 on 27 April 2018, 22:05:24
Good job. :y :y :y
Title: Re: Another cup holder solution
Post by: Viral_Jim on 28 April 2018, 10:13:58
I did similar using a VW cup holder, again about 0.5DIN. Like the extra coin box piece that you have. I just used a blank  :y
Title: Re: Another cup holder solution
Post by: danzigfan on 28 April 2018, 10:38:54
I saw your thread, that was nice too. I'm using coin box for parking card. Looks much better this way than it was before, with a adapter that only had a hole under the radio
Title: Re: Another cup holder solution
Post by: zirk on 28 April 2018, 11:55:42
(https://s20.postimg.cc/57xebcyrh/IMAG1433.jpg)

(https://s20.postimg.cc/a6kwpwaa5/IMAG1436.jpg)

(https://s20.postimg.cc/64umswvjx/IMAG1439.jpg)

(https://s20.postimg.cc/4ielz48jh/IMAG1435.jpg)

(https://s20.postimg.cc/820jovt8t/IMAG1434.jpg)