Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Jan Suhr on 29 September 2017, 18:34:46

Title: Radio connector pinout
Post by: Jan Suhr on 29 September 2017, 18:34:46
Can anybody help me with the pinouts on this connector from a CART2007 Phillips unit. Number 17 - 36. As you can see on the image some are not used.

Image is flipped so that the numbers match the label on the radio, unfortunately number  17 - 36 isn't labeled. I am mainly looking for the connection to the steering wheel buttons.
On my other Omega that cable is in the lowest connectors #5 and that one is not used here.


(http://www.protouring.se/files/new_omega/radio_connector.jpg)


My cable adapter has connections at the following positions:
18-23
27
32-36

So there is a mismatch in some

Title: Re: Radio connector pinout
Post by: Doctor Gollum on 29 September 2017, 18:44:18
What age is the car you are comparing it to?
Title: Re: Radio connector pinout
Post by: Jan Suhr on 29 September 2017, 18:44:52
Its a 2002
Title: Re: Radio connector pinout
Post by: Doctor Gollum on 29 September 2017, 18:50:52
Should be the same, but equally be irrelevant if your replacing the unit with non factory  :y
Title: Re: Radio connector pinout
Post by: TheBoy on 29 September 2017, 18:56:55
Be aware than GM label the pins correctly. Most dumb assed internet sites do it the other way round.
Title: Re: Radio connector pinout
Post by: Jan Suhr on 29 September 2017, 18:57:45
The unit I'm putting in has support for steering wheel buttons. If I can find the correct cable the steering wheel buttons will work. I did this on my other Omega byt then that cable was in pos 5 on the lowest connector where it is empty on this car.

If I can find out which one between 17 - 36 is the steering wheel control it will work on this aftermarket unit.

Here is my post about the other Omega when I got it to work there.
http://www.omegaowners.com/forum/index.php?topic=136202.msg1748266#msg1748266

Thanks
Title: Re: Radio connector pinout
Post by: TheBoy on 29 September 2017, 19:12:01
pins 1 and 7
Title: Re: Radio connector pinout
Post by: Jan Suhr on 01 October 2017, 12:55:31
Pin 1 worked perfectly.

Thanks