Topic: Breaking prefacelift mv6 1998 (Read 7549 times)

RobseyMV6 · « **on:** 04 May 2009, 18:20:59 »

Omega mv6 auto in blue saloon paint code Z 282, low mileage 93K
but new engine fitted in 2004, cloth recaro seats, all complete but no washer jets...
Middle and back boxes are no good, apart from that, the rest can go to a new home

Bumbazor · « **Reply #1 on:** 04 May 2009, 21:01:44 »

What condition are the wheels and tyres in? I have cash waiting. You have PM.

tmx · « **Reply #2 on:** 04 May 2009, 21:34:31 »

How much for 2x 3 Litre Heads with cams then & the headlamp washer jets & pipes?

RobseyMV6 · « **Reply #3 on:** 04 May 2009, 21:48:55 »

Quote

What condition are the wheels and tyres in? I have cash waiting. You have PM.

the wheels are potentially sold, waiting to hear from the guy about pick-up

RobseyMV6 · « **Reply #4 on:** 04 May 2009, 21:54:10 »

Quote

How much for 2x 3 Litre Heads with cams then & the headlamp washer jets & pipes?

both washer jets were broken off
i do have pipes to the pumps, how much of the pipework do you need?
as to heads, engine may be sold complete this week, waiting to hear back. I`ll update you if i still have it, thanks

tmx · « **Reply #5 on:** 04 May 2009, 22:59:26 »

i need the nozzle bits with the plastic nozzley bit pipes mate

RobseyMV6 · « **Reply #6 on:** 04 May 2009, 23:06:31 »

Quote

i need the nozzle bits with the plastic nozzley bit pipes mate

Did you mean the part that bolts on to the under side of the xenon headlights? and pipes running just to the pump?

MutantCav · « **Reply #7 on:** 04 May 2009, 23:08:55 »

I have a couple of 3.0 heads here mate and a set of 3.0 cams if the engine from this sells as a whole

RobseyMV6 · « **Reply #8 on:** 04 May 2009, 23:18:36 »

Quote

I have a couple of 3.0 heads here mate and a set of 3.0 cams if the engine from this sells as a whole

Will sale engine as hole, so hope he takes up your offer

going crazy · « **Reply #9 on:** 05 May 2009, 10:45:59 »

Any luck with the rear door soleniod fitting mine? The number I have on mine is 90449074. Love to have central locking work on all the doors

Thanks

RobseyMV6 · « **Reply #10 on:** 05 May 2009, 12:17:27 »

Yes, PM sent

Bumbazor · « **Reply #11 on:** 05 May 2009, 13:30:11 »

Hi, heard anything about the wheels yet?

Also is the washer bottle available? I've just fitted headlight washers to mine and need a bottle with dual output.

Thanks

RobseyMV6 · « **Reply #12 on:** 05 May 2009, 18:36:56 »

Quote

Hi, heard anything about the wheels yet?

Also is the washer bottle available? I've just fitted headlight washers to mine and need a bottle with dual output.

The guy should have turned up an hour ago

so looks like i have the wheels still. I hate time wasters

Washer bottle i have, both preface and facelift, what bottle are you after?

Bumbazor · « **Reply #13 on:** 05 May 2009, 18:48:39 »

I need the bottle for my pre facelift car but it has to have the output for headlight washers.

RobseyMV6 · « **Reply #14 on:** 05 May 2009, 18:56:16 »

Ok have here, do you need anything but the washer bottle? eg pumps/pipes?

Bumbazor · « **Reply #15 on:** 05 May 2009, 19:28:18 »

Hi, I read your PM first. Should have checked here before. I'll need the headlight washer pump with the bottle too if it comes without. I have all pipes. PM me with new price.

As I said I'll pass on the wheels but thanks for considering me.

RobseyMV6 · « **Reply #16 on:** 05 May 2009, 19:42:56 »

PM sent

woodsy_mv6 · « **Reply #17 on:** 07 May 2009, 10:01:49 »

Hi Rob.

How much was it you were after for the wheels?
Also, what kind of nick is the header tank in? Me rebuilds starting to come together now, and its the last thing on my list. Refuse to pay stealer prices for that

This ain't the one you showed me a year or so ago is it, with the popped tensioners??
O', and never got to thank you and your misses for the bump start

RobseyMV6 · « **Reply #18 on:** 07 May 2009, 11:15:05 »

Hi there! The bump start was at least some exercise for her

PM sent

going crazy · « **Reply #19 on:** 07 May 2009, 20:28:21 »

Quote

Yes, PM sent

Rob/ Marti,

Recieved the item today. Thanks again, hopefully I will figure out how to remove the window handle & get to replacing this over the w/e

Thanks,
Suhas

RobseyMV6 · « **Reply #20 on:** 07 May 2009, 20:32:47 »

No problem Suhas

MV6Matt · « **Reply #21 on:** 08 May 2009, 07:57:39 »

Quote

I have a couple of 3.0 heads here mate and a set of 3.0 cams if the engine from this sells as a whole

Can you use the 3.0 Cylinder heads in a 2.5 engine like the 3.0 litre cams?

....Or have I got the wrong end of the stick?

RobseyMV6 · « **Reply #22 on:** 08 May 2009, 19:23:35 »

Ok still have the engine for sale, yet another time waster from ebay lets you down again

doz · « **Reply #23 on:** 08 May 2009, 21:50:01 »

How much do you want for the engine loom? If it's not been cut etc?

924boy · « **Reply #24 on:** 08 May 2009, 21:58:04 »

carbon fibre dash parts and door card trims available?

RobseyMV6 · « **Reply #25 on:** 09 May 2009, 08:27:44 »

Quote

How much do you want for the engine loom? If it's not been cut etc?

I`ve got several wiring looms, are you after the 3.0 auto?
PM sent

RobseyMV6 · « **Reply #26 on:** 09 May 2009, 08:33:58 »

Quote

carbon fibre dash parts and door card trims available?

Yup, got that
PM sent

mikeh · « **Reply #27 on:** 10 May 2009, 22:23:28 »

Hi, do you have the drivers side door check strap and mechanism.
Thanks.

Sheepie · « **Reply #28 on:** 10 May 2009, 22:30:06 »

Hi mate can you pm me ur lowest price on teh engine please as i need 1 to save my car from the scrap yard

RobseyMV6 · « **Reply #29 on:** 11 May 2009, 18:09:08 »

Quote

Hi mate can you pm me ur (I'm just lazy, can't be bothered to type 'you are') lowest price on teh engine please as i need 1 to save my car from the scrap yard

Pm sent

RobseyMV6 · « **Reply #30 on:** 11 May 2009, 18:22:38 »

Quote

Hi, do you have the drivers side door check strap and mechanism.
Thanks.

Sorry all damaged what i had here

barclay03 · « **Reply #31 on:** 12 May 2009, 21:04:59 »

Drivers side glovebox?

RobseyMV6 · « **Reply #32 on:** 12 May 2009, 21:26:56 »

Quote

Drivers side glovebox?

Will look tomorrow evening to see if any good, have a facelift one here but not sure if the same but looks it.

PM sent

hotel21 · « **Reply #33 on:** 12 May 2009, 22:29:21 »

Facelift ashtray complete?? :-/

RobseyMV6 · « **Reply #34 on:** 13 May 2009, 06:35:27 »

Sorry Broocie, facelift was ex police, so none there..

adomz · « **Reply #35 on:** 14 May 2009, 14:49:08 »

hello mate!!

could i see some pictures of the front seats, as i will be looking for some, cheers!!

Adam

RobseyMV6 · « **Reply #36 on:** 14 May 2009, 19:38:42 »

Quote

hello mate!!

could i see some pictures of the front seats, as i will be looking for some, cheers!!

Adam

PM me you're email address and i'll send you some pic this weekend

adomz · « **Reply #37 on:** 15 May 2009, 03:32:11 »

the pm has been sent!

Adam

adomz · « **Reply #38 on:** 18 May 2009, 15:25:24 »

any updares on the pics man?

kentelite · « **Reply #39 on:** 19 May 2009, 23:37:27 »

Don't suppose you still have the offside windscreen washer jet housing and underbonnet connection (for an M reg Elite)?

Chris

arlee219 · « **Reply #40 on:** 21 May 2009, 20:59:09 »

Hi bud
I'm after front bumper with fog lights for 2.2CD Auto Xreg
I've seen yours like unpainted, which suits me, but wondered if that would fit?
Should it be any good for mine, is there a chance for it and what's the price?
cheerio

RobseyMV6 · « **Reply #41 on:** 08 June 2009, 19:48:36 »

still many parts left off this blue mig.
all parts have been removed for quick despatch

News:

Author Topic: Breaking prefacelift mv6 1998 (Read 7549 times)