Topic: Omega Bits including Irmscher Front Bumper (Read 3870 times)

pedroMV6 · « **on:** 23 May 2011, 18:59:38 »

The truck isn't gonna get finished for various reasons, but mainly spiralling fuel and insurance costs. Plus the fact that The Louts doesn't like living outside!
So, a few Omega parts are for sale.

Brand new unused Facelift Irmscher front bumper, mint condition (obviously wants painting) c/w fittings, foglights, etc - still in it's packaging.

Finding another would be a bit on the 'difficult' side..............
£500

Then there's a set of pre-facelift almost mint Irmscher Soft Star 17" wheels plus mid-price tyres only run for a couple of hundred miles then taken off road - £300

Facelift Irmscher estate rear spoiler in green (which green, I don't really know, but it's kinda dark mica metallic) still on a decent tailgate. £40 ovno

Bose kit inc phone, speakers, looms, head unit etc - £100 ono. Buyer to remove from dash and front doors.

Removable towbar and twin electrics - £75

Rest of truck can go in one for £250 - 2.5 V6 auto, some interior electrics don't work, but AC did work fine. Some vacuum hoses on the engine are FUBAR. Needs gaskets and breathers doing.
Auto box works well.
Rear wheel bearings done 3/4 years ago.
ABS module replaced around 15k miles back.
Dispack replaced around the same time.
Front springs, all four discs and pads replaced about 20k miles back.
Facelift Elite wheels (need refurb) and shot tyres included.

More details please PM me, pics on request.

pedroMV6 · « **Reply #1 on:** 23 May 2011, 21:49:03 »

Bumper

Wheels & Tyres

The pics were taken last winter, and only moved twenty feet (back into the garage) since then.
Tyres are 2x Admiral SP712 with 5-6mm tread and 2x Dunlop SP Sport 9090 with 4-5 mm tread.
All tyres are 235/45 ZR 17 in size.

VXL V6 · « **Reply #2 on:** 23 May 2011, 21:51:41 »

Which Bose head unit is in the car Pedro?

pedroMV6 · « **Reply #3 on:** 23 May 2011, 21:59:54 »

Quote

Which Bose head unit is in the car Pedro?

CCRT 2008 - tape, radio, 4 x cd cartridge player and phone.

hotel21 · « **Reply #4 on:** 23 May 2011, 22:30:23 »

Thought you had a buyer for the removable towbar? :-? :-/

Obviously not, so I'm still happy to purchase. Please advise postage.

pedroMV6 · « **Reply #5 on:** 23 May 2011, 22:37:12 »

Quote

Thought you had a buyer for the removable towbar? :-? :-/

Obviously not, so I'm still happy to purchase. Please advise postage.

Yeah, he bailed when he sold my old MV6.

To be honest, it would probably be bloody expensive - the ball itself weighs a fair bit, then there's the steel work to throw into the equation.
Also it's a matter of having time to remove things that bothers me - I have alot on, but if I can get an hour or so at the weekend, I'll get it off and weigh it up. Can't promise owt, mind.......

hotel21 · « **Reply #6 on:** 23 May 2011, 22:41:13 »

Quote

Quote
Thought you had a buyer for the removable towbar? :-? :-/

Obviously not, so I'm still happy to purchase. Please advise postage.

Yeah, he bailed when he sold my old MV6.
To be honest, it would probably be bloody expensive - the ball itself weighs a fair bit, then there's the steel work to throw into the equation.
Also it's a matter of having time to remove things that bothers me - I have alot on, but if I can get an hour or so at the weekend, I'll get it off and weigh it up. Can't promise owt, mind.......

I will be at the Lakes meet in the next few weeks and would happily take in a trip to your good self to uplift the bar and wiring complete, if you are in a position to remove it meantime?

Lazydocker · « **Reply #7 on:** 23 May 2011, 22:41:22 »

Quote

Thought you had a buyer for the removable towbar? :-? :-/

Obviously not, so I'm still happy to purchase. Please advise postage.

I've just bought a fixed one from Witter and it's in excess of 20Kgs

Anyway... If you want LPG on the Bonny Gold Beast you might want to stick with a Flange type tow bar to mount the filler on

pedroMV6 · « **Reply #8 on:** 23 May 2011, 22:44:19 »

Quote

Quote
Quote
Thought you had a buyer for the removable towbar? :-? :-/

Obviously not, so I'm still happy to purchase. Please advise postage.

Yeah, he bailed when he sold my old MV6.
To be honest, it would probably be bloody expensive - the ball itself weighs a fair bit, then there's the steel work to throw into the equation.
Also it's a matter of having time to remove things that bothers me - I have alot on, but if I can get an hour or so at the weekend, I'll get it off and weigh it up. Can't promise owt, mind.......

I will be at the Lakes meet in the next few weeks and would happily take in a trip to your good self to uplift the bar and wiring complete, if you are in a position to remove it meantime?

When is the Lakes meet? I'm a fair old way from there to be honest!

hotel21 · « **Reply #9 on:** 23 May 2011, 22:46:46 »

Quote

When is the Lakes meet? I'm a fair old way from there to be honest!

So am I!

Meet is circa 8/9th July at Keswick. I'm North of Edinburgh so, to collect from you then upto the meet, well, its only another few hours, TBH....

hotel21 · « **Reply #10 on:** 23 May 2011, 22:48:03 »

Quote

....... If you want LPG on the Bonny Gold Beast you might want to stick with a Flange type tow bar to mount the filler on

I'm remembering

(but wanting to keep options open....)

Lazydocker · « **Reply #11 on:** 23 May 2011, 22:52:38 »

Quote

Quote
....... If you want LPG on the Bonny Gold Beast you might want to stick with a Flange type tow bar to mount the filler on

I'm remembering (but wanting to keep options open....)

Hopefully have some more pictures for you next week

Hannah Judes Dad · « **Reply #12 on:** 25 May 2011, 11:48:16 »

Quote

Quote
Quote
Thought you had a buyer for the removable towbar? :-? :-/

Obviously not, so I'm still happy to purchase. Please advise postage.

Yeah, he bailed when he sold my old MV6.
To be honest, it would probably be bloody expensive - the ball itself weighs a fair bit, then there's the steel work to throw into the equation.
Also it's a matter of having time to remove things that bothers me - I have alot on, but if I can get an hour or so at the weekend, I'll get it off and weigh it up. Can't promise owt, mind.......

I will be at the Lakes meet in the next few weeks and would happily take in a trip to your good self to uplift the bar and wiring complete, if you are in a position to remove it meantime?

H21 I'm hoping to make it to the lakes and I live a lot closer to pedroMV6 if you want me to bring it along I will

pedroMV6 · « **Reply #13 on:** 25 May 2011, 18:29:36 »

Quote

Quote
Quote
Quote
Thought you had a buyer for the removable towbar? :-? :-/

Obviously not, so I'm still happy to purchase. Please advise postage.

Yeah, he bailed when he sold my old MV6.
To be honest, it would probably be bloody expensive - the ball itself weighs a fair bit, then there's the steel work to throw into the equation.
Also it's a matter of having time to remove things that bothers me - I have alot on, but if I can get an hour or so at the weekend, I'll get it off and weigh it up. Can't promise owt, mind.......

I will be at the Lakes meet in the next few weeks and would happily take in a trip to your good self to uplift the bar and wiring complete, if you are in a position to remove it meantime?

H21 I'm hoping to make it to the lakes and I live a lot closer to pedroMV6 if you want me to bring it along I will

Great idea!

If it's a definite, I'll get it off this weekend - with a bit of luck........

hotel21 · « **Reply #14 on:** 25 May 2011, 20:49:29 »

Consider it a definite.

Can sort out the logistics of uplift after removal. I also travel up and down the country regularly, albeit without any known timetable, week to week.

pedroMV6 · « **Reply #15 on:** 26 May 2011, 19:50:53 »

Quote

Consider it a definite. Can sort out the logistics of uplift after removal. I also travel up and down the country regularly, albeit without any known timetable, week to week.

Cool, I shall have it off the car for you on Saturday.

pedroMV6 · « **Reply #16 on:** 29 May 2011, 16:08:28 »

Maybe tomorrow!

pedroMV6 · « **Reply #17 on:** 30 May 2011, 13:55:06 »

Quote

Quote
Quote
Quote
Thought you had a buyer for the removable towbar? :-? :-/

Obviously not, so I'm still happy to purchase. Please advise postage.

Yeah, he bailed when he sold my old MV6.
To be honest, it would probably be bloody expensive - the ball itself weighs a fair bit, then there's the steel work to throw into the equation.
Also it's a matter of having time to remove things that bothers me - I have alot on, but if I can get an hour or so at the weekend, I'll get it off and weigh it up. Can't promise owt, mind.......

I will be at the Lakes meet in the next few weeks and would happily take in a trip to your good self to uplift the bar and wiring complete, if you are in a position to remove it meantime?

H21 I'm hoping to make it to the lakes and I live a lot closer to pedroMV6 if you want me to bring it along I will

When would you be thinking of popping in, Mr. Dad?

pedroMV6 · « **Reply #18 on:** 03 June 2011, 20:27:26 »

Back to the top!

RobG · « **Reply #19 on:** 03 June 2011, 20:33:56 »

extract from the rules
No thread bumping (posting on a thread, purely to get it to back to top of the list).

pedroMV6 · « **Reply #20 on:** 03 June 2011, 20:45:14 »

Why ever not? :-/

No worse than someone who hasn't contributed to the forum with 250 posts and can still stick for sale ads up through the back door.

RobG · « **Reply #21 on:** 03 June 2011, 21:01:56 »

Quote

Why ever not? :-/

No worse than someone who hasn't contributed to the forum with 250 posts and can still stick for sale ads up through the back door.

Ask admin, they draft the rules/guidelines

GmasterT · « **Reply #22 on:** 04 June 2011, 01:45:16 »

Wish I could afford that bumper, I could of got my old sponsors to copy it

Jim · « **Reply #23 on:** 04 June 2011, 20:22:25 »

Quote

Wish I could afford that bumper, I could of got my old sponsors to copy it

How would they copy it ??, do they make a mould if it?? how much would it cost to make the mould??

pedroMV6 · « **Reply #24 on:** 05 June 2011, 19:34:19 »

If anyone is interested in anything, please don't reply to me on here as I'm off due to stupid petty rules and won't be looking back in.
You are welcome to email me on pete_croft1@hotmail.com

Goodbye.

RobG · « **Reply #25 on:** 05 June 2011, 19:39:47 »

Quote

If anyone is interested in anything, please don't reply to me on here as I'm off due to stupid petty rules and won't be looking back in.
You are welcome to email me on pete_croft1@hotmail.com

Goodbye.

Rather naive thinking mate. They were put in place for a reason.

TheBoy · « **Reply #26 on:** 05 June 2011, 21:45:49 »

Quote

If anyone is interested in anything, please don't reply to me on here as I'm off due to stupid petty rules and won't be looking back in.

Sorry you feel like that, but I have explained these are the current rules and the reasons for them in PMs, despite the abusive replies I received from you.

Its obviously your call if you wish to delete your account, leave it dormant, or stay.

TheBoy · « **Reply #27 on:** 05 June 2011, 21:49:36 »

Quote

Why ever not? :-/

No worse than someone who hasn't contributed to the forum with 250 posts and can still stick for sale ads up through the back door.

As per PMs, we do not allow For Sale ads anywhere unless members have the required postcount. You have yet to show me one where we have allowed or missed one, yet this seems to be a major gripe you have :-/

TheBoy · « **Reply #28 on:** 05 June 2011, 21:52:14 »

Quote

Quote
If anyone is interested in anything, please don't reply to me on here as I'm off due to stupid petty rules and won't be looking back in.
You are welcome to email me on pete_croft1@hotmail.com

Goodbye.

Rather naive thinking mate. They were put in place for a reason.

Generally, rules put in place for the benefit of the majority become stupid and petty when they do not meet the needs of the individual

GmasterT · « **Reply #29 on:** 05 June 2011, 23:54:08 »

Quote

Quote
Wish I could afford that bumper, I could of got my old sponsors to copy it
How would they copy it ??, do they make a mould if it?? how much would it cost to make the mould??

Yeah, they would take the mould from the original bumper, I can look into costs and rights if you or OOF are interested?

feeutfo · « **Reply #30 on:** 06 June 2011, 00:48:47 »

Quote

Quote
Quote
Wish I could afford that bumper, I could of got my old sponsors to copy it
How would they copy it ??, do they make a mould if it?? how much would it cost to make the mould??

Yeah, they would take the mould from the original bumper, I can look into costs and rights if you or OOF are interested?

Needs to be a decent durable material. Fibers glass stuff just doesn't last ime.

Hannah Judes Dad · « **Reply #31 on:** 06 June 2011, 19:07:47 »

Quote

Quote
Quote
Quote
Wish I could afford that bumper, I could of got my old sponsors to copy it
How would they copy it ??, do they make a mould if it?? how much would it cost to make the mould??

Yeah, they would take the mould from the original bumper, I can look into costs and rights if you or OOF are interested?
Needs to be a decent durable material. Fibers glass stuff just doesn't last ime.

Carbon Fibre

or Cadburys ?

Andy B · « **Reply #32 on:** 06 June 2011, 20:21:06 »

Quote

....
or Cadburys ?

they're only interested in profits, so f sodd 'em!

Jim · « **Reply #33 on:** 06 June 2011, 21:50:47 »

Quote

Quote
Quote
Wish I could afford that bumper, I could of got my old sponsors to copy it
How would they copy it ??, do they make a mould if it?? how much would it cost to make the mould??

Yeah, they would take the mould from the original bumper, I can look into costs and rights if you or OOF are interested?

I'd be intrested!!!

feeutfo · « **Reply #34 on:** 07 June 2011, 00:16:42 »

Quote

Quote
Quote
Quote
Quote
Wish I could afford that bumper, I could of got my old sponsors to copy it
How would they copy it ??, do they make a mould if it?? how much would it cost to make the mould??

Yeah, they would take the mould from the original bumper, I can look into costs and rights if you or OOF are interested?
Needs to be a decent durable material. Fibers glass stuff just doesn't last ime.

Carbon Fibre

or Cadburys ?

Either! Cost will be similar I should imagine.

Carbon fibre irmscher air dam... Hmmm. Strokes chin... Car is black...hmmm... 8-)

albitz · « **Reply #35 on:** 07 June 2011, 00:26:45 »

Now that would be ~~cool~~ sub zero 8-) 8-)- and probably cost more than the car.

serek · « **Reply #36 on:** 07 June 2011, 11:04:18 »

in poland they use polyester composites
to mould them
front

rear
http://imageshack.us/photo/my-images/135/20110511188.jpg/

skirts
http://imageshack.us/photo/my-images/27/01122009212.jpg/
all lot for just under 350£ +pp

robbo2345 · « **Reply #37 on:** 10 June 2011, 11:09:31 »

Thats very interesting serek do they do them for the estate me wonders

:-?

GmasterT · « **Reply #38 on:** 14 June 2011, 22:07:44 »

waiting for a reply back on my end, the person I need to speak to is on holiday

News:

Author Topic: Omega Bits including Irmscher Front Bumper (Read 3870 times)

feeutfo

feeutfo

albitz