Omega Owners Forum

Chat Area => Meetings, gatherings, parties etc => Topic started by: theolodian on 25 February 2007, 12:17:59

Title: Midlands non-cambelt party
Post by: theolodian on 25 February 2007, 12:17:59
Despite all that was done in Brackley, being miggys there is still a list of things people want/need to do.  I would like to get the ball rolling on an event for March 24th.  Location TBD, somewhere in the midlands.  Doors, suspension, brakes, and my leaking EM's have all been mentioned.  Oh, and I'm sure we can do a cambelt or two if any are left after Brackley!

I'm saddled with on-street parking so I can't host at my place.  :(  Maybe I can do my turn this fall, we're looking for a place with a garage.

Anyone up for a meet?
Title: Re: Midlands non-cambelt party
Post by: MaxV6 on 25 February 2007, 20:31:37
as I've said elsewhere, I plan on hosting an event here in Oxford in the foreseeable future , however, much though I'd LOVE to,  I can't do that date.....    a week after my mother's 60th birthday , and a week before my daughter's 18th and sons's 16th... I'm going to be SO skint as to beggar belief....

Mid-Late April on the other hand MIGHT be do-able.

Max
Title: Re: Midlands non-cambelt party
Post by: theolodian on 25 February 2007, 20:48:09
Quote
as I've said elsewhere, I plan on hosting an event here in Oxford in the foreseeable future , however, much though I'd LOVE to,  I can't do that date.....    a week after my mother's 60th birthday , and a week before my daughter's 18th and sons's 16th... I'm going to be SO skint as to beggar belief....

Mid-Late April on the other hand MIGHT be do-able.

Max
There's no reason we can't do more than one.  OTOH, if the date is otherwise amenable, there is absolutely no reason for you to pay for our food if you are providing the venue!
Title: Re: Midlands non-cambelt party
Post by: MaxV6 on 25 February 2007, 21:46:52
Unfortunately mate, , it's slightly more complicated than that  :( , there's the political angle with SWMBO, to do with finishing major jobs around the house first, like emptying our dining room of boxes (awaiting a studio to go in) , turning my office into a second living room, and getting the studio waiting to be built on the back of the garage underway, to accommodate my office and equipment....  then work commitments for both of us,  , and also the small matter of  the bits I'd like to try and get done at the same time.... (Sintra Cambelt, it's a sideways mounted Meega V6 lump ;) , maybe the Omega gearbox oil change, )

Life's complicated.......   especially within 6 months of having moved house.....

I can't manage all of it in 4 weeks.....  

8 weeks is pushing it, but possible.

But that doesn't preclude there being more such events elsewhere.....    :y

Title: Re: Midlands non-cambelt party
Post by: theolodian on 25 February 2007, 22:52:47
That's cool, don't feel pressured.
Title: Re: Midlands non-cambelt party
Post by: Bo Bo on 26 February 2007, 10:20:18
I'm up for it, I have a few niggly little jobs I'd like to do/get advice for.
Can maybe use my place, but as you know space is pretty limited.
Title: Re: Midlands non-cambelt party
Post by: sir moanalot on 26 February 2007, 15:03:20
im up for the 24th march at yours bo bo if your offering, its in between a call out weekend and a kiddy one so thats perfect. tis only 99 miles (so auto express says and 2.09 hours, yeh right!)  :y
 if we get it sorted with a few bods i can bring some useful tools and a bit of "basic knowledge" from my days as a mechanic (when dizzy points and large engine compartments were all the rage). and i can  bring some doughnuts.... arrrggghhhh doughnuts......  :P

Title: Re: Midlands non-cambelt party
Post by: sir moanalot on 26 February 2007, 15:06:23
max,  just tell the missus you are off to b&q.........
Title: Re: Midlands non-cambelt party
Post by: Marks DTM Calib on 26 February 2007, 17:42:50
I'm a dead man unless I get the bathroom finished!....so I am stuck for a month or so....
Title: Re: Midlands non-cambelt party
Post by: MikeDundee on 26 February 2007, 19:59:00
Quote
I'm a dead man unless I get the bathroom finished!....so I am stuck for a month or so....

Would you like a hand with the bathroom?
Title: Re: Midlands non-cambelt party
Post by: theolodian on 26 February 2007, 20:34:52
Quote
I'm a dead man unless I get the bathroom finished!....so I am stuck for a month or so....
Conveniently this is exactly a month later!  :)

We'll try to keep this one a bit less intense!  8-)
Title: Re: Midlands non-cambelt party
Post by: nixoro on 27 February 2007, 10:29:25
I maybe up for this work depending, could someone who has my Mob number contact me nearer the time as Job change after tomorrow means my access to here will be very limited.

Cheers

Roy
Title: Re: Midlands non-cambelt party
Post by: tunnie on 27 February 2007, 10:47:50
i am up for another one, I can host again too if anyone wants me to?

I will be busy here at Uni until April now, must finish my project!

However, early June would be free for me. Parents are away, and I will need to finish preparing the Senator for Europe. My 2.2 needs its diff pinion seal doing too....
Title: Re: Midlands non-cambelt party
Post by: Bo Bo on 08 March 2007, 10:29:05
Sorry guys can't do this one, I'm off to Ireland  :)
Title: Re: Midlands non-cambelt party
Post by: JamesV6CDX on 10 March 2007, 12:01:20
I'll be on hand for cambelt changes, etc etc
Title: Re: Midlands non-cambelt party
Post by: theolodian on 10 March 2007, 12:05:47
Quote
I'll be on hand for cambelt changes, etc etc
That's cool.  Slight issue of where, was going to be at Bo Bo's . . .  :-?

I'm still game to get together, Timbuk is interested.  I need to do front suspension, and/or any of a variety of other jobs.  I can't host though.
Title: Re: Midlands non-cambelt party
Post by: Bo Bo on 12 March 2007, 14:45:26
Quote
Slight issue of where, was going to be at Bo Bo's . . .  :-?
The flight deals were too good to turn down  ;)
Title: Re: Midlands non-cambelt party
Post by: chipito on 04 June 2007, 21:59:13
Are there any Midlands meets in the offing guys?  :-?
Title: Re: Midlands non-cambelt party
Post by: Bo Bo on 05 June 2007, 11:35:30
Quote
Are there any Midlands meets in the offing guys?  :-?
I'm sure there'll be one before too long......
Title: Re: Midlands non-cambelt party
Post by: chipito on 09 June 2007, 16:30:43
That'll be nice.
Do you talk to us folks with tiddly base models in or is it reserved for the Big Boy cars?  ;)
Title: Re: Midlands non-cambelt party
Post by: Bo Bo on 11 June 2007, 14:15:49
Quote
That'll be nice.
Do you talk to us folks with tiddly base models in or is it reserved for the Big Boy cars?  ;)
Everyone's welcome  :y
Title: Re: Midlands non-cambelt party
Post by: chipito on 11 June 2007, 22:39:05
Awwww... Bless ya.
I'm feeling all warm and toasty.
Uh oh ...
Time to check the colostomy bag.  ;D
Title: Re: Midlands non-cambelt party
Post by: Bo Bo on 12 June 2007, 07:26:48
Quote
Awwww... Bless ya.
I'm feeling all warm and toasty.
Uh oh ...
Time to check the colostomy bag.  ;D
Keep checking in here, there may be something happening later in the summer  ;)
Title: Re: Midlands non-cambelt party
Post by: VXL V6 on 21 June 2007, 11:07:58
I'm up for a midlands meet as well.
Title: Re: Midlands non-cambelt party
Post by: Bo Bo on 21 June 2007, 20:30:50
Quote
I'm up for a midlands meet as well.
Have you checked this (http://www.omegaowners.com/forum/YaBB.pl?num=1182087835) out?
Could always pop in during the day if you're not up for camping....
Title: Re: Midlands non-cambelt party
Post by: amigov6 on 24 June 2007, 02:20:06
Quote
That'll be nice.
Do you talk to us folks with tiddly base models in or is it reserved for the Big Boy cars?  ;)
:)A Mig's a Mig no matter what spec. :D
Title: Re: Midlands non-cambelt party
Post by: TheBoy on 24 June 2007, 09:36:22
Quote
Quote
That'll be nice.
Do you talk to us folks with tiddly base models in or is it reserved for the Big Boy cars?  ;)
:)A Mig's a Mig no matter what spec. :D
Absolutely. We even allowed Tunnies rusty heap of junk senny up at the lakes....
Title: Re: Midlands non-cambelt party
Post by: spookyman60 on 07 July 2007, 21:47:47
im new here but would alos like to come out and lend my tools if i can help i will
so if im welcome with someting thats nearly as old as me with more scratches rust bad body repair jobs im up for it
Title: Re: Midlands non-cambelt party
Post by: Timbuk on 08 July 2007, 09:53:14
Quote
im new here but would alos like to come out and lend my tools if i can help i will
so if im welcome with someting thats nearly as old as me with more scratches rust bad body repair jobs im up for it              

That'll be Tunnie's Senny then ::)
Title: Re: Midlands non-cambelt party
Post by: spookyman60 on 10 July 2007, 09:09:10
lol if i could get a 3 ltr senny id have one used to have one when  i was younger 13 or 14 and was the exactly the same age down to the month as me lol now that was a car still better than any meega ive seen anyway