Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: Mike1962 on 22 June 2017, 20:49:06
-
The curb light lens in the drivers door has come off. it looks like it should clip back on but won't.
Any one any experience?
Also the one on the other side is blown. How do I access that.
PS the questions at the bottom got me! It tool a min to remember what the left pedal was on a manual! So long since i drove one!!
Thanks
Mike
-
its a plastic lens that fits to the black plastic ive just glued mine back on the other week dab of glue around the edge, (unclip it first from the door panel and remove wires) hold it down for a bit and leave to dry, wipe of glue edge looks good as new. there is an edge on black part put something flat in the an prise it out.
-
Yep as said just glue the lens back on... :y
-
I had to glue mine back on after I attempted to remove it to change the bulb and promptly tore the lens off the rest of the unit..
-
There a couple of tangs on the back of the doorcard that allow them to come out as a unit, I broke several till I sussed that
-
Many thanks!
-
IN the forum guide on how to change a broken headlight adjuster I learned that to remove a headlight lens I put the headlight in the oven at 150 degrees for 10 minutes, and to reassemble it I repeat the process. It works a treat. Best to wear thick leather gauntlets..
-
IN the forum guide on how to change a broken headlight adjuster I learned that to remove a headlight lens I put the headlight in the oven at 150 degrees for 10 minutes, and to reassemble it I repeat the process. It works a treat. Best to wear thick leather gauntlets..
This won't work on these as the lenses are heat 'welded' rather than bonded with goo. The heat for removing headlight lenses is more to do with softening 15+ year old goo than actually unplug them ;)
-
I have always used a hair dryer to dismantle and replace the ones I have done in the passed without any trouble at all :y
-
I have always used a hair dryer to dismantle and replace the ones I have done in the passed without any trouble at all :y
By ones, you mean headlights :-\
-
Thanks all of you!
Levered them out abd superglue!
Sorted!!