Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: kvcali on 02 December 2017, 18:19:06
-
Does anyone have an electric diagram ( circuit) omega omega remake (restyling) 2001. year
-
This should help:-
https://manuals.co/workshop/opel/omega/opel-omega-1994-1999-workshop-manual/5576876
Ron.
-
This should help:-
https://manuals.co/workshop/opel/omega/opel-omega-1994-1999-workshop-manual/5576876
Ron.
A bit too different electrically.
Tis2web is what you need for facelift cars, although it only covers 2002 and 2003, the 2001 is near enough (if the car is DBW).
-
This should help:-
https://manuals.co/workshop/opel/omega/opel-omega-1994-1999-workshop-manual/5576876
Ron.
A bit too different electrically.
Tis2web is what you need for facelift cars, although it only covers 2002 and 2003, the 2001 is near enough (if the car is DBW).
Haynes is useful enough for late 3.0/2.5 but not the 2001 Catera as that is, electrically speaking, the 3.2...
-
I need a wirning diagram from 2000 to 2003 year, not a motor more than an electrical installation
pecifically from electric heater seats that differ from model <1999, more precisely switches...
-
(http://theboy.omegaowners.com/oofpics/oof_odds_and_sods/seatheaters.JPG)
-
thank you, that !
where is the K183 and K184 relay in the car?
Subsequently, the seat was inserted, so the heaters do not work
-
They are seat controllers, under the foam of the seat.
If you fitted seats from a pre 2000 car, they won't have the seat controllers, which is one of many reasons why you can't mix wrong age seats in Omegas
-
Ok, thank you
That's right, now they're leather seats, but I'll get it out of linen
my English language may be irregular, sorry
-
Want age car did the shitty leather seats come from?
Did I mention, I hate leather seats? Cold in winter, hot in summer. Awful things :(
-
yes, seats are very good
(https://s26.postimg.org/9tdagj97d/IMG_20170916_154515.jpg) (https://postimg.org/image/qtw6p7m8l/)
(https://s26.postimg.org/628rrc1uh/IMG_20170916_154524.jpg) (https://postimg.org/image/n2ro00evp/)
(https://s26.postimg.org/k79iw14k9/IMG_20170916_154537.jpg) (https://postimg.org/image/u4kjp3c5x/)
(https://s26.postimg.org/6qhmaa0k9/IMG_20170916_154539.jpg) (https://postimg.org/image/3wegwtydx/)
(https://s26.postimg.org/m9a0aa2jd/IMG_20170916_154552.jpg) (https://postimg.org/image/9un89yb11/)
(https://s26.postimg.org/ycfbxudll/IMG_20170916_154600.jpg) (https://postimg.org/image/iqy0dw1n9/)
(https://s26.postimg.org/42dxbbmft/IMG_20170916_154612.jpg) (https://postimg.org/image/tl69oc5zp/)
-
Very nice, but also very wrong...
Those seats aren't compatible with your car as they belong to the Prefacelift model... ::)
-
Everything works and everything fits in with the heater because there are no such relays, but I also got them ;)
-
I cant see the pics, but if they are from a PFL, you need to swap over the pretensioners, and if your car has it, all the seat occupancy stuff. You will lose active head restraints, which you probably need to let your insurance know, as its a critical safety feature - its not viable to swap these over.
Seems a lot of effort to have uncomfortable, unsightly seats ;)
-
Here's what the controller and PTC resistor looks like, just to link up on this semi above
It's very simple, I've found all the wires from the controller on the diagram
https://s7.postimg.org/nkr82bw7f/IMG_20171206_142315.jpg
-
(http://theboy.omegaowners.com/oofpics/oof_odds_and_sods/seatheaters.JPG)
friends, that you do not have this image in the higher resolution and whether you have the color mark of the wire