Sod's Law has a Rider - any "5 minute job" will be sure to take at least 2 hours!
Ron.
Now 2 afternoons and counting. I found the leak by jacking the rad up c20mm and running up to temp again. It is seeping around the base of the offside locating spigot, which probably took a knock due to not being properly protected for transit.
Courier due tomorrow to do a swap. Thats saturday afternoon as well then.
There are times a nice base model Focus looks tempting.
Which is one reason why I am keen to go & collect my replacement
Are you going to the actual factory to collect or does your supplier receive goods by carrier angels with kid gloves?
The crack in mine was invisible to the naked eye so take your best specs.
For my sins and Omega/beer money I often spend the evening sat at the sharp end of an artic waiting for hundreds of fragile/handle with care items to be lovingly slung in the back from either a height or distance, somtimes both, so my only surprise is how much stuff actually arrives in one piece.
Replacement arrived yesterday and slotted in today no bother apart from the wind blowing the bonnet down on my head a few times. Same supplier but different manufacturer. Better packaged (though the pegs were still vulnerable) and slightly better looking quality. This one even includes the mounting lug for the atf pipe brace. Now just need to rummage out suitable bolt and nuts to replac the drilled out top cover fixings and I'm ready for the next challenge. Judging by the amount of wading hanging out the tailpipe it wont be long coming.
Steve