Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[sjc]

Pair of good Xenons with aluminium adjusters fitted and good, clear lenses, complete with bulbs and ballasts.
£60 collected, £70 posted.

 

[Gaffers]

Would that be everything needed to convert from projectors to Xenons?  Or would I need more bits?

[Diamond Black Geezer]

I think logistically - yes (just a bit of chopping of wiring) legally - no. You'd need the levelling sensors on the axles. These, however, are pretty readily available, as many FLs got Xenons. FL CDX and Elite standard. 

[steve6367]

Would that be everything needed to convert from projectors to Xenons?  Or would I need more bits?

You would need a different headlight switch, Headlight levelling ECU, 2 x sensors and some wiring to convert.

[steve6367]

Would that be everything needed to convert from projectors to Xenons?  Or would I need more bits?

You would need a different headlight switch, Headlight levelling ECU, 2 x sensors and some wiring to convert. (without blinding those around you)

[05omegav6]

Would that be everything needed to convert from projectors to Xenons?  Or would I need more bits?

Ignoring the fact that they won't fit your car without looking ridiculous... Facelift ones are a different shape

[05omegav6]

Apologies, that was rather flippant... You need the ecu, headlight washers plus associated gubbins, two level sensors, the loom and switch. Mv6/sports can ignore the headlight washer etc from the above list.

Hypothetically you can divert the dipped bead feed to the xenon ballast and leave it at that, but won't be legal.

[Gaffers]

Ah I see, if they wont fit then it's a non-starter.

Can you tell this is my first facelift?

[steve6367]

I missed that - FL has pointy corners as below