Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: Chazza12 on 22 June 2018, 12:59:39
-
Would any one know why both head light adjusters would not work. 0to3 dose nothing. Checked fuses all fine have high and low beam and Sidelights but no they not miving on any number cannot even hear the motors going. Put on meter to wiring on drivers side and yellow and first brown has 10 volts nothing on the next brow to yellow. On any number selected. Is it the switch on the dash playing up or something ells as would not thought both motors going at the same time ?
-
Fixed it the slide control pins were compress down so not contacting the board. Lifted them back up and both motors are working now. :)
-
Fixed it the slide control pins were compress down so not contacting the board. Lifted them back up and both motors are working now. :)
:y :y
-
Hi new to all this but have the same issue on my 3.2 elite.which pins are you referring too? Headlight switch or motors? Many thanks
-
Hi new to all this but have the same issue on my 3.2 elite.which pins are you referring too? Headlight switch or motors? Many thanks
Yours will be the motors... The switch shouldn't have headlight level adjustment on it. If it does, it won't work. Ever.
Being an Elite you have Xenon headlights... These have their own ecu controlling headlight level according to two sensors, 1 front 1 rear, on the nearside. Any problems and the system will tell you via the display ;)
When you first switch the headlights on, do they move up and down slightly? If yes, the motors are fine, if no, then you have a problem...